Kept Art Restoration

Construction managers plan, coordinate, budget, and supervise construction projects from early development to completion.

Construction managers typically do the following:

• Prepare and negotiate cost estimates, budgets, and work timetables
• Select appropriate construction methods and strategies
• Interpret and explain contracts and technical information to workers and other professionals
• Report on work progress and budget matters to clients
• Collaborate with architects, engineers, and other construction and building specialists
• Instruct and supervise construction personnel and activities onsite
• Respond to work delays and other problems and emergencies
• Select, hire, and instruct laborers and subcontractors  
• Comply with legal requirements, building and safety codes, and other regulations

Construction managers, often called general contractors or project managers, coordinate and supervise a wide variety of projects, including the building of all types of residential, commercial, and industrial structures, roads, bridges, powerplants, schools, and hospitals. They oversee specialized contractors and other personnel. Construction managers schedule and coordinate all design and construction processes to ensure a productive and safe work environment. They also make sure jobs are completed on time and on budget with the right amount of tools, equipment, and materials. Many managers also are responsible for obtaining necessary permits and licenses. They are often responsible for multiple projects at a time.

Construction managers work closely with other building specialists, such as architects, engineers, and a variety of trade workers, such as stonemasons, electricians, and carpenters. Projects may require specialists in everything from structural metalworking and painting, to landscaping, building roads, installing carpets, and excavating sites. Depending on the project, construction managers also may interact with lawyers and local government officials. For example, when working on city-owned property or municipal buildings, managers sometimes confer with city council members to ensure that all regulations are met.

For projects too large to be managed by one person, such as office buildings and industrial complexes, a construction manager would only be in charge of one part of the project. Each construction manager would oversee a specific construction phase and choose subcontractors to complete it. Construction managers may need to collaborate and coordinate with other construction managers who are responsible for different aspects of the project.

To maximize efficiency and productivity, construction managers often use specialized cost-estimating and planning software to effectively budget the time and money required to complete specific projects. Many managers also use software to determine the best way to get materials to the building site. For more information, see the profile on cost estimators.

Automotive service technicians and mechanics, often called service technicians or service techs, inspect, maintain, and repair cars and light trucks.  

Automotive service technicians and mechanics typically do the following:

• Test parts and systems to ensure that they are working properly
• Identify mechanical problems, often by using computerized diagnostic equipment
• Follow checklists to ensure that all critical parts are examined
• Test and lubricate the vehicle's engine and other major components
• Perform basic care and maintenance, including oil changes, tuneups, and tire rotations
• Repair or replace worn parts, such as brake pads and wheel bearings
• Disassemble and reassemble parts
• Use testing equipment to ensure that repairs and maintenance are effective
• Explain to clients their automotive problems and the repairs done on their vehicles

Service technicians work on traditional mechanical components, such as engines, transmissions, belts, and hoses. However, they must also be familiar with a growing number of electronic systems. Braking, transmission, and steering systems, for example, are controlled primarily by computers and electronic components.

Other integrated electronic systems, such as accident-avoidance sensors, are becoming common as well. In addition, a growing number of technicians are required to work on vehicles that run on alternative fuels, such as ethanol and electricity.

Service technicians use many different tools, including computerized diagnostic tools and power tools such as pneumatic wrenches, lathes, welding torches, and jacks and hoists. These tools usually are owned by their employers.

Service technicians also use many common handtools, such as pliers, wrenches, and screwdrivers, which generally are their own. In fact, experienced workers often have thousands of dollars invested in their personal tool collection.

Service technicians sometimes specialize in a particular type of repair that may be subject to specific regulations or procedures. For instance, those focused on air-conditioning system repairs must follow federal and state regulations governing the handling, recycling, and disposal of refrigerants.

In some shops, technicians may specialize. The following are types of service technicians:

Automotive air-conditioning repairers install and repair air conditioners and service parts, such as compressors, condensers, and controls. They are trained in government regulations related to their work.

Brake repairers adjust brakes, replace brake linings and pads, and make other repairs on brake systems. Some technicians specialize in both brake and front-end work. 

Front-end mechanics align and balance wheels and repair steering mechanisms and suspension systems. They frequently use special alignment equipment and wheel-balancing machines.

Transmission technicians and rebuilders work on gear trains, couplings, hydraulic pumps, and other parts of transmissions. Extensive knowledge of computer controls, the ability to diagnose electrical and hydraulic problems, and other specialized skills are needed to work on these complex components.

Tune-up technicians adjust ignition timing and valves and adjust or replace spark plugs and other parts to ensure efficient engine performance. They often use electronic testing equipment to isolate and adjust malfunctions in fuel, ignition, and emissions control systems.

For information about technicians who work on large trucks and buses, see the profile on diesel service technicians and mechanics.

For information about technicians who work on farm equipment, construction vehicles, and rail cars, see the profile on heavy vehicle and mobile equipment service technicians.

For information about technicians who repair and service motorcycles, motorboats, and small all-terrain vehicles, see the profile on small engine mechanics.

Roofers repair and install the roofs of buildings using a variety of materials, including shingles, asphalt, and metal.

Roofers typically do the following:

• Inspect problem roofs to determine the best way to repair them
• Measure roof to calculate the quantities of materials needed
• Replace damaged or rotting joists or plywood
• Install vapor barriers or layers of insulation
• Install shingles, asphalt, metal, or other materials to make the roof watertight
• Align roofing materials with edges of the roof
• Cut roofing materials to fit angles formed by walls, vents, or intersecting roof surfaces
• Cover exposed nail or screw heads with roofing cement or caulk to prevent leakage

Properly installed roofs keep water from leaking into buildings and damaging the interior, equipment, or furnishings.

There are two basic types of roofs, low-slope and steep-slope:

• Low-slope: About two-thirds of all roofs are low-slope. Most commercial, industrial, and apartment buildings have low-slope roofs. Low-slope roofs rise 4 inches or less per horizontal foot and are installed in layers.
  
  For low-slope roofs, roofers typically use several layers of roofing materials or felt membranes stuck together with hot bitumen (a tar-like substance). They glaze the top layer to make a smooth surface or embed gravel in the hot bitumen to make a rough surface.
  
  An increasing number of low-slope roofs are covered with a single-ply membrane of waterproof rubber or thermoplastic compounds.

• Steep-slope: Most of the remaining roofs are steep-slope. Most single-family houses have steep-slope roofs. Steep-slope roofs rise more than 4 inches per horizontal foot.
  
  For steep-slope roofs, roofers typically use asphalt shingles, which often cost less than other coverings. On steep-slope roofs, some roofers also install tile, solar shingles, fiberglass shingles, metal shingles, or shakes (rough wooden shingles).
  
  To apply shingles, roofers first lay, cut, and tack 3-foot strips of roofing over the entire roof. Then, starting from the bottom edge, they nail overlapping rows of shingles to the roof.

A small but increasing number of buildings now have “green” roofs that incorporate landscape roofing systems. A landscape roofing system typically begins with a single or multiple waterproof layers. After that layer is proven to be leak free, roofers put a root barrier over it, and, finally, layers of soil, in which vegetation is planted. Roofers must ensure that the roof is watertight and can endure the weight and water needs of the plants.

Curators oversee collections, such as artwork and historic items, and may conduct public service activities for an institution. Museum technicians and conservators prepare and restore objects and documents in museum collections and exhibits.

Curators, museum technicians, and conservators typically do the following:

• Acquire, store, and exhibit collections
• Select the theme and design of exhibits
• Develop or set up exhibit materials
• Design, organize, or conduct tours and workshops for the public
• Attend meetings and civic events to promote the institution
• Clean objects using cleansers, solvents, and soap solutions
• Direct and supervise curatorial, technical, and student staff
• Plan and conduct special research projects

Many objects and documents are important or historically significant. Curators, museum technicians, and conservators preserve and organize the display of these materials.

The following are occupational specialties:

Curators manage museums, zoos, aquariums, botanical gardens, nature centers, and historic sites. The museum director often is a curator. Curators direct the acquisition, storage, and exhibit of collections, including negotiating and authorizing the purchase, sale, exchange, or loan of collections. They also may authenticate, evaluate, and categorize the specimens in a collection.

Curators often oversee and help conduct the institution's research projects and related educational programs.

Today, an increasing part of a curator's duties involves fundraising and promotion, which may include writing and reviewing grant proposals, journal articles, and publicity materials. In addition, many curators attend meetings, conventions, and civic events.

Most curators specialize in a particular field, such as botany, art, or history. Those who work in large institutions may be highly specialized. A large natural history museum, for example, might employ separate curators for its collections of birds, fishes, insects, and mammals.

Some curators take care of their collections, some do research related to items in the collection, and others do administrative tasks. In small institutions with only one or a few curators, one curator may be responsible for a number of tasks, from taking care of collections to directing the affairs of the museum.

Museum technicians, commonly known as registrars, help curators by preparing and taking care of museum items. Registrars also may answer questions from the public and help curators and outside scholars use the collections.

Conservators manage, preserve, treat, and document works of art, artifacts, and specimens--work that may require substantial historical, scientific, and archaeological research. Conservators document their findings and treat items to minimize their deterioration or to restore them to their original state.

Conservators usually specialize in a particular material or group of objects, such as documents and books, paintings, decorative arts, textiles, metals, or architectural material. They use x rays, chemical testing, microscopes, special lights, and other laboratory equipment and techniques to examine objects, determine their condition, and decide on the best way to preserve them.

In addition to their conservation work, conservators participate in outreach programs, research topics in their specialty, and write articles for scholarly journals. They may be employed by a museum or other institution that has objects needing conservation, or they may be self-employed and have several clients.

Drywall and ceiling tile installers hang wallboards to walls and ceilings inside buildings. Tapers prepare the wallboards for painting, using tape and other materials. Many workers do both installing and taping.

Drywall installers typically do the following:

• Review design plans to minimize the number of cuts and waste of wallboard
• Measure the location of electrical outlets, plumbing, windows, and vents
• Cut drywall to the right size, using utility knives and power saws
• Fasten drywall panels to interior wall studs, using nails or screws
• Trim and smooth rough edges so boards join evenly

Ceiling tile installers typically do the following:

• Measure according to blueprints or drawings
• Nail or screw supports
• Put tiles or sheets of shock-absorbing materials on ceilings  
• Keep the tile in place with cement adhesive, nails, or screws

Tapers typically do the following:

• Prepare wall surface (wallboard) by patching nail holes
• Apply tape and use sealing compound to cover joints between wallboards
• Apply additional coats of sealing compound to create an even surface
• Sand all joints and holes to a smooth, seamless finish

Installers are also called framers or hangers. Tapers are also called finishers. Ceiling tile installers are sometimes called acoustical carpenters because they work with tiles that block sound.

Once wallboards are hung, workers use increasingly wider trowels to spread multiple coats of spackle over cracks, indentations, and any remaining imperfections. Some workers may use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

To work on ceilings, drywall and ceiling tile installers and tapers may use mechanical lifts or stand on stilts, ladders, or scaffolds.