Staker & Parson Companies

Civil engineers design and supervise large construction projects, including roads, buildings, airports, tunnels, dams, bridges, and systems for water supply and sewage treatment.

Civil engineers typically do the following:

• Analyze survey reports, maps, and other data to plan projects
• Consider construction costs, government regulations, potential environmental hazards, and other factors in planning stages
• Test soils to determine the adequacy and strength of foundations
• Test building materials, such as concrete, asphalt, or steel, for use in particular projects
• Provide cost estimates for materials, equipment, or labor to determine a project's economic feasibility
• Use design software to plan and design transportation systems, hydraulic systems, and structures in line with industry and government standards
• Oversee, or participate in, surveying to establish reference points, grades, and elevations to guide construction
• Present their findings to the public on topics such as bid proposals, environmental impact statements, or property descriptions

Many civil engineers hold supervisory or administrative positions ranging from supervisor of a construction site to city engineer. Others work in design, construction, research, and teaching. They work with others on projects and may be assisted by civil engineering technicians and technologists.

The federal government employs about 12,100 civil engineers to do many of the same things done in private industry, except that the federally employed civil engineers may also inspect projects to be sure that they comply with regulations.

Civil engineers work on complex projects, so they usually specialize in one of several areas.

Geotechnical engineers work to make sure that foundations are solid. They focus on how structures built by civil engineers, such as buildings and tunnels, interact with the earth (including soil and rock). Additionally, they design and plan for slopes, retaining walls, and tunnels.

Structural engineers design and assess major projects, such as bridges or dams, to ensure their strength and durability.

Transportation engineers plan and design everyday systems, such as streets and highways, but they also plan larger projects, such as airports, ports, and harbors.

Construction equipment operators drive, maneuver, or control the heavy machinery used to construct roads, bridges, buildings, and other structures.

Construction equipment operators typically do the following:

• Check to make sure that equipment functions properly
• Clean, maintain, and make basic repairs to equipment
• Report malfunctions to supervisors
• Move levers, push pedals, or turn valves to activate power equipment
• Drive and maneuver equipment
• Coordinate machine actions with crew members in response to hand or audio signals
• Ensure that safety standards are met

Construction equipment operators use machinery to move construction materials, earth, and other heavy materials at construction sites and mines. They operate equipment that clears and grades land to prepare it for construction of roads, bridges, and buildings, as well as airport runways, power generation facilities, dams, levees, and other structures.

The following are types of construction equipment operators:

Operating engineers and other construction equipment operators work with one or several types of power construction equipment. They may operate excavation and loading machines equipped with scoops, shovels, or buckets that dig sand, gravel, earth, or similar materials. In addition to operating the familiar bulldozer, they operate trench excavators, road graders, and similar equipment. Sometimes, they may drive and control industrial trucks or tractors equipped with forklifts or booms for lifting materials. They also may operate and maintain air compressors, pumps, and other power equipment at construction sites.

Paving and surfacing equipment operators control the machines that spread and level asphalt or spread and smooth concrete for roadways or other structures. Paving and surfacing equipment operators may specialize further:

• Asphalt spreader operators turn valves to regulate the temperature of asphalt and the flow of asphalt onto the roadbed. They must ensure that the machine distributes the paving material evenly, and they also must ensure that there is a constant flow of asphalt into the hopper.
• Concrete paving machine operators control levers and turn handwheels to move attachments that spread, vibrate, and level wet concrete. They must watch the surface of the concrete carefully to identify low spots into which workers must add concrete.
• Tamping equipment operators use machines that compact earth and other fill materials for roadbeds or other construction sites. They also may operate machines with interchangeable hammers to cut or break up old pavement and drive guardrail posts into the ground.

Piledriver operators use large machines mounted on skids, barges, or cranes to hammer piles into the ground. Piles are long, heavy beams of wood or steel driven into the ground to support retaining walls, bridges, piers, or building foundations. Some piledriver operators work on offshore oil rigs.

Some workers operate cranes to move construction materials. For more information on these workers, see the profile on material moving machine operators.

Cement masons pour, smooth, and finish concrete floors, sidewalks, roads, and curbs. Using a cement mixture, terrazzo workers create durable and decorative surfaces for floors and stairways.

Cement masons typically do the following:

• Set the forms that hold concrete in place
• Install reinforcing rebar or mesh wire to strengthen the concrete
• Signal truck drivers to facilitate the pouring of concrete
• Spread, level, and smooth concrete, using a trowel, float, or screed
• Mold expansion joints and edges
• Monitor curing (hardening) to ensure a durable, smooth, and uniform finish
• Apply sealants or waterproofing to protect concrete

Terrazzo workers typically do the following (in addition to what cement masons do):

• Measure ingredients for terrazzo
• Blend a marble chip mixture that may have colors in it 
• Grind and polish surfaces for a smooth, lustrous look

Concrete is one of the most common and durable materials used in construction. Once set, concrete--a mixture of cement, sand, gravel, and water--becomes the foundation for everything from decorative patios and floors to huge dams or miles of roadways.

The following are types of cement masons and terrazzo workers:

Cement masons and concrete finishers place and finish concrete. They may color concrete surfaces, expose aggregate (small stones) in walls and sidewalks, or make concrete beams, columns, and panels.

Throughout the process of pouring, leveling, and finishing concrete, cement masons must monitor how the wind, heat, or cold affects the curing of the concrete. They must have a thorough knowledge of the characteristics of concrete so that, by using sight and touch, they can determine what is happening to the concrete and take measures to prevent defects.

Terrazzo workers and finishers create decorative walkways, floors, patios, and panels. Although much of the preliminary work in pouring, leveling, and finishing concrete is similar to that of cement masons, terrazzo workers create more decorative finishes by blending a fine marble chip into the cement, which is often colored. Once the terrazzo is thoroughly set, workers correct any depressions or imperfections with a grinder to create a smooth, uniform finish.