Sun City Awnings

Construction laborers and helpers do many basic tasks that require physical labor on construction sites.

Construction laborers and helpers typically do the following:

• Clean and prepare construction sites by removing debris and possible hazards
• Load or unload building materials to be used in construction
• Build or take apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
• Dig trenches, backfill holes, or compact earth to prepare for construction
• Operate or tend equipment and machines used in construction, such as concrete mixers
• Help other craftworkers with their duties
• Follow construction plans and instructions from the people they are working for

Construction laborers and helpers work on almost all construction sites, doing a wide range of tasks from the very easy to the extremely difficult and hazardous. Although many of the tasks they do require some training and experience, most jobs usually require little skill and can be learned quickly. 

The following are occupational specialties:

Construction laborers do a variety of construction-related activities during all phases of construction. Although most laborers are generalists--such as those who install barricades, cones, and markers to control traffic patterns--many others specialize. For example, those who operate the machines and equipment that lay concrete or asphalt on roads are more likely to specialize in those areas.

Most construction laborers work in the following areas:

• Building homes and businesses
• Tearing down buildings
• Removing hazardous materials
• Building highways and roads
• Digging tunnels and mine shafts

Construction laborers use a variety of tools and equipment. Some tools are simple, such as brooms and shovels; other equipment is more sophisticated, such as pavement breakers, jackhammers, earth tampers, and surveying equipment.

With special training, laborers may help transport and use explosives or run hydraulic boring machines to dig out tunnels. They may learn to use laser beam equipment to place pipes and use computers to control robotic pipe cutters. They may become certified to remove asbestos, lead, or chemicals.

Helpers assist construction craftworkers, such as electricians and carpenters, with a variety of basic tasks. They may carry tools and materials or help set up equipment. For example, many helpers work with cement masons to move and set forms. Many other helpers assist with taking apart equipment, cleaning up sites, and disposing of waste, as well as helping with any other needs of craftworkers.

Many construction trades have helpers who assist craftworkers. The following are examples of trades that have associated helpers:

• Brickmasons, blockmasons, stonemasons, and tile and marble setters
• Carpenters
• Electricians
• Painters, paperhangers, plasterers, and stucco masons
• Pipelayers, plumbers, pipefitters, and steamfitters
• Roofers

Glaziers install glass in windows, skylights, storefronts, and display cases to create distinctive designs or reduce the need for artificial lighting.

Glaziers typically do the following:

• Follow blueprints or specifications for size, color, type, and thickness of glass to be used
• Remove any old or broken glass before installing replacement glass
• Cut glass to the specified size and shape
• Make or install sashes or moldings for glass installation
• Fasten glass into sashes or frames with clips, moldings, or other types of fasteners
• Add weather seal or putty around pane edges to seal joints

Glass has many uses in modern life. For example, insulated and specially treated glass keeps in warm or cool air and controls sound and condensation. Tempered and laminated glass makes doors and windows more secure. The creative use of large windows, glass doors, skylights, and sunroom additions makes buildings bright, airy, and inviting. Glaziers specialize in installing these different glass products.

In homes, glaziers install or replace windows, mirrors, shower doors, and bathtub enclosures. They fit glass for tabletops and display cases. On commercial interior projects, glaziers install items such as heavy, often etched, decorative room dividers or security windows. Glazing projects also may involve replacing storefront windows for supermarkets, auto dealerships, banks, and so on.

Workers who replace and repair glass in motor vehicles are not covered in this profile. For more information, see the profile on automotive body and glass repairers.  

For most large scale construction jobs, glass is precut and mounted into frames at a factory or a contractor's shop. The finished glass arrives at the jobsite ready for glaziers to position and secure into place. Using cranes or hoists with suction cups, workers lift large, heavy pieces of glass for installation. In cases where the glass is not secure inside the frame, glaziers may attach steel and aluminum sashes or frames to the building, and then secure the glass with clips, moldings, or other types of fasteners. 

A few glaziers work with plastics, granite, marble, and other materials used as glass substitutes.  Some work with films or laminates that improve the durability or safety of the glass.

Drywall and ceiling tile installers hang wallboards to walls and ceilings inside buildings. Tapers prepare the wallboards for painting, using tape and other materials. Many workers do both installing and taping.

Drywall installers typically do the following:

• Review design plans to minimize the number of cuts and waste of wallboard
• Measure the location of electrical outlets, plumbing, windows, and vents
• Cut drywall to the right size, using utility knives and power saws
• Fasten drywall panels to interior wall studs, using nails or screws
• Trim and smooth rough edges so boards join evenly

Ceiling tile installers typically do the following:

• Measure according to blueprints or drawings
• Nail or screw supports
• Put tiles or sheets of shock-absorbing materials on ceilings  
• Keep the tile in place with cement adhesive, nails, or screws

Tapers typically do the following:

• Prepare wall surface (wallboard) by patching nail holes
• Apply tape and use sealing compound to cover joints between wallboards
• Apply additional coats of sealing compound to create an even surface
• Sand all joints and holes to a smooth, seamless finish

Installers are also called framers or hangers. Tapers are also called finishers. Ceiling tile installers are sometimes called acoustical carpenters because they work with tiles that block sound.

Once wallboards are hung, workers use increasingly wider trowels to spread multiple coats of spackle over cracks, indentations, and any remaining imperfections. Some workers may use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

To work on ceilings, drywall and ceiling tile installers and tapers may use mechanical lifts or stand on stilts, ladders, or scaffolds.

Electrical and electronics installers and repairers install, repair, or replace a variety of electrical equipment in telecommunications, transportation, utilities, and other industries.

Electrical and electronics installers and repairers typically do the following:

• Prepare cost estimates for clients
• Refer to service guides, schematics, and manufacturer specifications
• Repair or replace defective parts, such as motors, fuses, or gaskets
• Reassemble and test equipment after repairs
• Maintain records of parts used, labor time, and final charges

Electrical and electronics installers and repairers work on complex pieces of electronic equipment.

Automated electronic control systems are becoming increasingly complex. As a result, repairers use software programs and testing equipment to diagnose malfunctions. Among their diagnostic tools are multimeters--which measure voltage, current, and resistance--and advanced multimeters, which measure the capacitance, inductance, and current gain of transistors.

Repairers also use signal generators, which provide test signals, and oscilloscopes, which display signals graphically. In addition, repairers use handtools such as pliers, screwdrivers, soldering irons, and wrenches to replace faulty parts and adjust equipment.

Commercial and industrial equipment electrical and electronics repairers repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas.

Electrical and electronics installers and repairers of transportation equipment install, adjust, or maintain mobile communication equipment, including sound, sonar, security, navigation, and surveillance systems on trains, watercraft, or other vehicles.

Powerhouse, substation, and relay electrical and electronics repairers inspect, test, maintain, or repair electrical equipment used in generating stations, substations, and inservice relays. These workers may be known as powerhouse electricians, relay technicians, or power transformer repairers.

Electric motor, power tool, and related repairers--such as armature winders, generator mechanics, and electric golf cart repairers--specialize in installing, maintaining, and repairing electric motors, wiring, or switches.

Electronic equipment installers and repairers of motor vehicles install, diagnose, and repair sound, security, and navigation equipment in motor vehicles. Motor vehicle installers and repairers work with an increasingly complex range of electronic equipment, including DVD players, navigation systems, and passive and active security systems.

Electrical and electronic installers and repairers may specialize, according to how and where they work:

Field technicians often travel to factories or other locations to repair equipment. When equipment breaks down, field technicians go to a customer's site to repair the equipment. Because repairing components is a complex activity, workers on the factory floor usually remove and replace defective units, such as circuit boards, instead of fixing them. Defective units are discarded or returned to the manufacturer or a specialized shop for repair.

Bench technicians work in repair shops in factories and service centers, fixing components that cannot be repaired on the factory floor. These workers also locate and repair circuit defects, such as poorly soldered joints, blown fuses, or malfunctioning transistors.

Woodworkers build a variety of products, such as cabinets and furniture, using wood.

Woodworkers typically do the following:

• Read detailed schematics and blueprints
• Prepare and set up equipment
• Lift wood pieces onto machines, either by hand or with hoists
• Operate wood-making and cutting machines
• Listen for unusual sounds or detect excessive vibration
• Ensure that products meet specifications, making adjustments as necessary
• Use hand tools to trim pieces or assemble products
• Remove and replace dull saw blades

Despite the abundance of plastics, metals, and other materials, wood products continue to be an important part of our daily lives. Woodworkers make wood products, using lumber and synthetic wood materials. Many of these products are mass produced, including most furniture, kitchen cabinets, and musical instruments. Other products are custom made with specialized tools in small shops.

Although the term “woodworker” may evoke the image of a craftsman who builds ornate furniture using hand tools, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work.

Even specialized artisans generally use a variety of power tools in their work. Much of the work is done in a high-production assembly line facility, but there is also some work that is customized and does not lend itself to being made in an assembly line. Woodworkers are employed in every part of the secondary wood products industry, from sawmill to finished product, and their activities vary.

Woodworkers set up, operate, and tend all types of woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, and wood-nailing machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After wood parts are made, woodworkers add fasteners and adhesives and connect the pieces to form a complete unit. They then sand, stain, and, if necessary, coat the wood product with a sealer, such as a lacquer or varnish.

Many of these tasks are handled by different workers with specialized training.

The following are types of woodworkers:

Cabinetmakers and bench carpenters cut, shape, assemble, and make parts for wood products. They often design and create sets of cabinets that are customized for particular spaces. In some cases, their duties begin with designing a set of cabinets to specifications and end with installing them.

Furniture finishers shape, finish, and refinish damaged and worn furniture. They often work with antiques and must judge how to best preserve and repair them. They also do the staining and sealing at the end of the process of making wooden products.

Wood sawing machine setters, operators, and tenders specialize in operating specific pieces of woodworking machinery. They often operate computerized numerical control (CNC) machines.

Woodworking machine setters, operators, and tenders, except sawing, operate woodworking machines, such as drill presses, lathes, routers, sanders, and planers.