Granite Warehouse

(317) 377-1550

CLICK HERE TO CLAIM THIS LISTING
Address Found 3728 N Shadeland Ave, Indianapolis, IN 46226
Territories Found Marion, IN

Premium Providers Floors BLVD (972-523-7117)

Carpenters

Carpenters construct and repair building frameworks and structures--such as stairways, doorframes, partitions, and rafters--made from wood and other materials. They also may install kitchen cabinets, siding, and drywall.

Carpenters typically do the following:

  • Follow blueprints and building plans to meet the needs of clients
  • Install structures and fixtures, such as windows and molding
  • Measure, cut, or shape wood, plastic, fiberglass, drywall, and other materials
  • Construct building frameworks, including wall studs, floor joists, and doorframes
  • Help put up, level, and install building framework with the aid of large pulleys and cranes
  • Inspect and replace damaged framework or other structures and fixtures
  • Instruct and direct laborers and other construction trade helpers

Carpenters are one of the most versatile construction occupations, with workers usually doing a variety of tasks. For example, some carpenters insulate office buildings; others install drywall or kitchen cabinets in homes. Those who help construct large buildings or bridges often make the wooden concrete forms for cement footings or pillars. Some carpenters build braces and scaffolding for buildings.

Carpenters use many different hand and power tools to cut and shape wood, plastic, fiberglass, or drywall. They commonly use handtools, including squares, levels, and chisels, as well as many power tools, such as sanders, circular saws, and nail guns. Carpenters put materials together with nails, screws, staples, and adhesives, and do a final check of their work to ensure accuracy. They use a tape measure on every project because proper measuring increases productivity, reduces waste, and ensures that the pieces being cut are the proper size.

The following are types of carpenters:

Residential carpenters typically specialize in new-home, townhome, and condominium building and remodeling. As part of a single job, they might build and set forms for footings, walls and slabs, and frame and finish exterior walls, roofs, and decks. They frame interior walls, build stairs, and install drywall, crown molding, doors, and kitchen cabinets. Highly-skilled carpenters may also tile floors and lay wood floors and carpet. Fully-trained construction carpenters are easily able to switch from new-home building to remodeling.

Commercial carpenters typically remodel and help build commercial office buildings, hospitals, hotels, schools, and shopping malls. Some specialize in working with light gauge and load-bearing steel framing for interior partitions, exterior framing, and curtain wall construction. Others specialize in working with concrete forming systems and finishing interior and exterior walls, partitions, and ceilings. Highly skilled carpenters can usually do many of the same tasks as residential carpenters.

Industrial carpenters typically work in civil and industrial settings where they put up scaffolding and build and set forms for pouring concrete. Some industrial carpenters build tunnel bracing or partitions in underground passageways and mines to control the circulation of air to worksites. Others build concrete forms for tunnels, bridges, dams, power plants, or sewer construction projects.


Interior Designers

Interior designers make interior spaces functional, safe, and beautiful for almost every type of building: offices, homes, airport terminals, shopping malls, and restaurants. They select and specify colors, finishes, fabrics, furniture, flooring and wallcoverings, lighting, and other materials to create useful and stylish interiors for buildings.

Interior designers typically do the following:

  • Determine the client's goals and requirements of the project
  • Consider how the space will be used and how people will move through the space
  • Sketch preliminary design plans
  • Specify materials and furnishings, such as lighting, furniture, wallcoverings, flooring, equipment, and artwork
  • Prepare final plans using computer applications
  • Create a timeline for the interior design project and estimate project costs
  • Oversee installing the design elements
  • Visit after the project to ensure that the client is satisfied
  • Search for and bid on new projects

Interior designers work closely with architects, structural engineers, and builders to determine how interior spaces will look and be furnished. Interior designers may read blueprints and must be aware of building codes and inspection regulations.

Although some sketches or drawings may be freehand, most interior designers use computer-aided design (CAD) software for the majority of their drawings.

Many designers specialize in particular types of buildings (homes, hospitals, or hotels), specific rooms (bathrooms or kitchens), or specific styles (early American or French Renaissance). Some designers work for home furnishings stores, providing design services to help customers choose materials and furnishings.

Some interior designers produce designs, plans, and drawings for construction and installation. This may include floor plans, lighting plans, or plans needed for building permits. Interior designers may draft the preliminary design into documents that could be as simple as sketches or as inclusive as construction documents, with schedules and attachments.

The following are examples of types of interior designers.

Sustainable designers use strategies to improve energy and water efficiencies and indoor air quality, and they specify environmentally preferable products such as bamboo or cork for floors. They may obtain certification in Leadership in Energy and Environmental Design (LEED) from the U.S. Green Building Council. Such certification indicates that a building or its interior space was designed with the use of sustainable concepts.

Universal designers renovate spaces to make them more accessible. Often, these designs are used to renovate spaces for elderly people or people with special needs; however, universal designs can benefit anyone. For example, an entry with no steps may be necessary for someone in a wheelchair, but it is also helpful for someone pushing a baby stroller.

Kitchen and bath designers specialize in kitchens and bathrooms and have expert knowledge of the variety of cabinets, fixtures, appliances, plumbing, and electrical solutions for these rooms.

Lighting designers focus on the effect of lighting for home, office, or public spaces. For example, lighting designers may work on stage productions, in gallery or museum spaces, or in health care facilities to find appropriate light fixtures and lighting effects for each space.

Closet designers design closet space for homes to maximize storage and increase orderliness. They work with both fixed structures and stand-alone storage systems.


Tile and Marble Setters

Tile and marble setters apply hard tile, marble, and wood tiles to walls, floors, and other surfaces.

Tile and marble setters typically do the following:

  • Clean and level the surface to be tiled
  • Measure and cut tile and marble
  • Arrange tiles according to the design plans
  • Prepare and apply mortar or other adhesives
  • Install tile and marble in the planned area
  • Apply grout with a rubber trowel
  • Wipe off excess grout and apply necessary finishes, such as sealants

Tile installers, tilesetters, and marble setters install materials on a variety of surfaces, such as floors, walls, ceilings, countertops, patios, and roof decks. Because tile and marble must be set on smooth, even surfaces, installers often must level the surface to be tiled with a layer of mortar or plywood. If the area to be tiled is unstable, workers must nail a support of metal mesh or tile backer board to create a stable surface.

To cut tiles, workers use power wet saws, tile scribes, or hand-held tile cutters to create even edges. They use trowels of different sizes to spread mortar or a sticky paste, called mastic, evenly on the surface to be tiled. To minimize imperfections and keep rows straight and even, they put spacers between tiles. The spacers keep tiles the same distance from each other until the mortar is dry. After the mortar dries and the tiles are set, they apply grout between tiles using a rubber trowel (called a float).

Marble setters may cut marble to a specified size with a power wet saw. After putting the marble in place, marble setters polish the marble to a high luster, using power or hand sanders.


Brickmasons, Blockmasons, and Stonemasons

Brickmasons, blockmasons, and stonemasons (or, simply, masons) use bricks, concrete blocks, and natural stones to build fences, walkways, walls, and other structures.

Masons typically do the following:

  • Read blueprints or drawings to calculate materials needed
  • Lay out patterns or foundations, using a straightedge
  • Break or cut bricks, stones, or blocks to their appropriate size
  • Mix mortar or grout and spread it onto a slab or foundation
  • Lay bricks, blocks, or stones according to plans
  • Clean excess mortar with trowels and other handtools
  • Construct corners with a corner pole or by building a corner pyramid
  • Ensure that a structure is perfectly vertical and horizontal, using a plumb bob and level
  • Clean and polish surfaces with hand or power tools
  • Fill expansion and contraction joints with the appropriate caulking materials

The following are common types of masons:

Brickmasons and blockmasons--who often are called bricklayers--build and repair walls, floors, partitions, fireplaces, chimneys, and other structures with brick, precast masonry panels, concrete block, and other masonry materials.

Pointing, cleaning, and caulking workers repair brickwork, particularly on older structures on which mortar has come loose. Special care must be taken not to damage the structural integrity or the existing bricks.

Refractory masons are brickmasons who specialize in installing firebrick and refractory tile in high-temperature boilers, furnaces, cupolas, ladles, and soaking pits in industrial establishments. Most of these workers are employed in steel mills, where molten materials flow on refractory beds from furnaces to rolling machines. They also are employed at oil refineries, glass furnaces, incinerators, and other locations with manufacturing processes that require high temperatures.

Stonemasons build stone walls, as well as set stone exteriors and floors. They work with two types of stone: natural-cut stone, such as marble, granite, and limestone; and artificial stone, made from concrete, marble chips, or other masonry materials. Using a special hammer or a diamond-blade saw, workers cut stone to make various shapes and sizes. Some stonemasons specialize in setting marble, which is similar to setting large pieces of stone.


Woodworkers

Woodworkers build a variety of products, such as cabinets and furniture, using wood.

Woodworkers typically do the following:

  • Read detailed schematics and blueprints
  • Prepare and set up equipment
  • Lift wood pieces onto machines, either by hand or with hoists
  • Operate wood-making and cutting machines
  • Listen for unusual sounds or detect excessive vibration
  • Ensure that products meet specifications, making adjustments as necessary
  • Use hand tools to trim pieces or assemble products
  • Remove and replace dull saw blades

Despite the abundance of plastics, metals, and other materials, wood products continue to be an important part of our daily lives. Woodworkers make wood products, using lumber and synthetic wood materials. Many of these products are mass produced, including most furniture, kitchen cabinets, and musical instruments. Other products are custom made with specialized tools in small shops.

Although the term “woodworker” may evoke the image of a craftsman who builds ornate furniture using hand tools, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work.

Even specialized artisans generally use a variety of power tools in their work. Much of the work is done in a high-production assembly line facility, but there is also some work that is customized and does not lend itself to being made in an assembly line. Woodworkers are employed in every part of the secondary wood products industry, from sawmill to finished product, and their activities vary.

Woodworkers set up, operate, and tend all types of woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, and wood-nailing machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After wood parts are made, woodworkers add fasteners and adhesives and connect the pieces to form a complete unit. They then sand, stain, and, if necessary, coat the wood product with a sealer, such as a lacquer or varnish.

Many of these tasks are handled by different workers with specialized training.

The following are types of woodworkers:

Cabinetmakers and bench carpenters cut, shape, assemble, and make parts for wood products. They often design and create sets of cabinets that are customized for particular spaces. In some cases, their duties begin with designing a set of cabinets to specifications and end with installing them.

Furniture finishers shape, finish, and refinish damaged and worn furniture. They often work with antiques and must judge how to best preserve and repair them. They also do the staining and sealing at the end of the process of making wooden products.

Wood sawing machine setters, operators, and tenders specialize in operating specific pieces of woodworking machinery. They often operate computerized numerical control (CNC) machines.

Woodworking machine setters, operators, and tenders, except sawing, operate woodworking machines, such as drill presses, lathes, routers, sanders, and planers.


Hancock Claims ConsultantsNationwide Overspray