Top Gun Cleaning Specialists

Maids and housekeeping cleaners perform general cleaning tasks, including making beds and vacuuming halls, in private homes and commercial establishments.

Maids and housekeeping cleaners typically do the following:

• Clean rooms, hallways, and other living or work areas
• Change sheets and towels; make beds; wash, fold, and iron clothes
• Empty wastebaskets and take trash to disposal areas
• Replenish supplies, such as soap and toilet paper
• Dust and polish furniture and equipment
• Sweep, wax, or polish floors using brooms, mops, or other floor-cleaning equipment
• Vacuum rugs, carpets, and upholstered furniture
• Clean or polish windows, walls, and woodwork
• Lift and move lightweight objects and equipment

Maids and housekeeping cleaners do light cleaning tasks in homes and commercial establishments, such as hotels, restaurants, hospitals, and nursing homes.

In addition to keeping these places clean and neat, maids who work in private homes also may prepare meals, polish silver, and clean ovens, refrigerators, and sometimes windows. Some also shop for groceries, pick up and drop off dry cleaning, and do other errands.

Those who work in hotels, hospitals, and other commercial establishments are responsible for cleaning and maintaining the premises. They may also share other duties. For example, housekeeping cleaners in hotels may deliver ironing boards, cribs, and rollaway beds to guests' rooms. In hospitals, workers may have to wash bed frames and disinfect and sanitize equipment with germicides.

Tile and marble setters apply hard tile, marble, and wood tiles to walls, floors, and other surfaces.

Tile and marble setters typically do the following:

• Clean and level the surface to be tiled
• Measure and cut tile and marble
• Arrange tiles according to the design plans
• Prepare and apply mortar or other adhesives
• Install tile and marble in the planned area
• Apply grout with a rubber trowel
• Wipe off excess grout and apply necessary finishes, such as sealants

Tile installers, tilesetters, and marble setters install materials on a variety of surfaces, such as floors, walls, ceilings, countertops, patios, and roof decks. Because tile and marble must be set on smooth, even surfaces, installers often must level the surface to be tiled with a layer of mortar or plywood. If the area to be tiled is unstable, workers must nail a support of metal mesh or tile backer board to create a stable surface.

To cut tiles, workers use power wet saws, tile scribes, or hand-held tile cutters to create even edges. They use trowels of different sizes to spread mortar or a sticky paste, called mastic, evenly on the surface to be tiled. To minimize imperfections and keep rows straight and even, they put spacers between tiles. The spacers keep tiles the same distance from each other until the mortar is dry. After the mortar dries and the tiles are set, they apply grout between tiles using a rubber trowel (called a float).

Marble setters may cut marble to a specified size with a power wet saw. After putting the marble in place, marble setters polish the marble to a high luster, using power or hand sanders.

Carpet installers lay carpet in homes, offices, restaurants, and many other types of buildings. 

Carpet installers typically do the following:

• Remove old carpet or flooring to prepare surfaces for laying new carpet
• Inspect the condition of the surface to be covered
• Fix any problems that could show through the carpet or cause uneven wear
• Measure the area to be carpeted
• Plan the layout of carpeting to get the best appearance and least wear
• Install a padded cushion underneath the carpet
• Roll out, measure, mark, and cut the carpet
• Fit the carpet so that it lays evenly and snugly
• Tack, glue, or staple carpeting to hold it in place
• Finish the edges so that the carpet looks neat

Carpet installers lay carpet in many types of new and old buildings, including homes, offices, restaurants, and museums. Although installing carpet in newly constructed buildings requires minimal preparation, those who replace existing carpet must first remove old flooring, including any padding, glue, tacks, or staples. In some cases, carpet installers lay carpet over existing tile or hardwood.

Carpet installers work with special tools, including a "knee kicker" to position the carpet and a power stretcher to pull the carpet snugly against walls. When they have to join seams of carpet (for example, in large rooms), they use special heat-activated tape. In commercial installations, they may glue the carpet to the floor or to padding that they have glued to the floor. On steps, they may use staples to hold the carpet in place. They also use carpet knives, carpet shears (scissors), hammers, power sanders, and other tools.

Janitors and building cleaners keep many types of buildings clean, orderly, and in good condition.

Janitors and building cleaners typically do the following:

• Gather and empty trash and trash bins
• Clean building floors by sweeping, mopping, or vacuuming them
• Clean bathrooms and stock them with soap, toilet paper, and other supplies
• Keep buildings secure by locking doors
• Clean spills and other hazards using sponges and squeegees
• Wash windows, walls, and glass
• Order cleaning supplies
• Make minor repairs to the building, such as changing light bulbs
• Notify managers when the building needs major repairs

Janitors and building cleaning workers keep office buildings, schools, hospitals, retail stores, hotels, and other places clean, sanitary, and in good condition. Some do only cleaning, while others have a wide range of duties.

In addition to keeping the inside of buildings clean and orderly, some janitors and building cleaners work outdoors, mowing lawns, sweeping walkways, or shoveling snow. Some janitors also monitor the heating and cooling system, ensuring that it functions properly.

Janitors and building cleaners use many tools and equipment. Simple cleaning tools may include mops, brooms, rakes, and shovels. Other tools may include snowblowers and floor buffers.

Some janitors may be responsible for repairing small problems with electricity or plumbing, such as leaky faucets.

Laundry and dry-cleaning workers clean clothing, linens, drapes, and other articles, using washing, drying, and dry-cleaning machines. They also may clean leather, suede, furs, and rugs.

Laundry and dry-cleaning workers typically do the following:

• Receive items from customers and mark them with codes or names
• Inspect articles for stains and fabrics that require special care
• Sort articles to be cleaned by fabric type, color, and cleaning technique
• Load clothing into laundry and dry-cleaning machines
• Add detergent, bleach, and other chemicals to laundry and dry-cleaning machines
• Remove, sort, and hang clothing and other articles after they are removed from the machines
• Clean and maintain laundry and dry-cleaning machines

Laundry and dry-cleaning workers ensure proper cleaning of clothing, linens, and other articles. They adjust machine settings for a given fabric or article, as determined by the cleaning instructions on each item of clothing.

When necessary, workers treat spots and stains on articles before washing or dry-cleaning. They monitor machines during the cleaning process and ensure that items are not lost or placed with items of another customer.

Sometimes, laundry and dry-cleaning workers interact with customers. They take the receipts, find the customer's clothing, take payment, make change, and do the cash register work that retail sales people do.

Some dry-cleaners offer alteration services. Often, sewers and tailors do these tasks, but some laundry and dry-cleaning workers do them as well. For more information, see the profile on sewers and tailors.