Absolute Painting and Carpentry

Tile and marble setters apply hard tile, marble, and wood tiles to walls, floors, and other surfaces.

Tile and marble setters typically do the following:

• Clean and level the surface to be tiled
• Measure and cut tile and marble
• Arrange tiles according to the design plans
• Prepare and apply mortar or other adhesives
• Install tile and marble in the planned area
• Apply grout with a rubber trowel
• Wipe off excess grout and apply necessary finishes, such as sealants

Tile installers, tilesetters, and marble setters install materials on a variety of surfaces, such as floors, walls, ceilings, countertops, patios, and roof decks. Because tile and marble must be set on smooth, even surfaces, installers often must level the surface to be tiled with a layer of mortar or plywood. If the area to be tiled is unstable, workers must nail a support of metal mesh or tile backer board to create a stable surface.

To cut tiles, workers use power wet saws, tile scribes, or hand-held tile cutters to create even edges. They use trowels of different sizes to spread mortar or a sticky paste, called mastic, evenly on the surface to be tiled. To minimize imperfections and keep rows straight and even, they put spacers between tiles. The spacers keep tiles the same distance from each other until the mortar is dry. After the mortar dries and the tiles are set, they apply grout between tiles using a rubber trowel (called a float).

Marble setters may cut marble to a specified size with a power wet saw. After putting the marble in place, marble setters polish the marble to a high luster, using power or hand sanders.

Grounds maintenance workers provide a pleasant outdoor environment by ensuring that the grounds of houses, businesses, and parks are attractive, orderly, and healthy.

Grounds maintenance workers typically do the following:

• Mow, edge, and fertilize lawns
• Weed and mulch landscapes
• Trim hedges, shrubs, and small trees
• Remove dead, damaged, or unwanted trees
• Plant flowers, trees, and shrubs
• Water lawns, landscapes, and gardens

Grounds maintenance workers do a variety of tasks to achieve a pleasant and functional outdoor environment. They also care for indoor gardens and plantings in commercial and public facilities, such as malls, hotels, and botanical gardens.

The following are types of grounds maintenance workers:

Landscaping workers create new outdoor spaces or upgrade existing ones by planting trees, flowers, and shrubs. They also trim, fertilize, mulch, and water plants. Some grade and install lawns or construct hardscapes such as walkways, patios, and decks. Others help install lighting or sprinkler systems. Landscaping workers work in a variety of residential and commercial settings, such as homes, apartment buildings, office buildings, shopping malls, and hotels and motels.

Groundskeeping workers, also called groundskeepers, maintain existing grounds. They care for plants and trees, rake and mulch leaves, and clear snow from walkways. They work on athletic fields, golf courses, cemeteries, university campuses, and parks, as well as in many of the same settings as landscaping workers. They also see to the proper upkeep and repair of sidewalks, parking lots, groundskeeping equipment, fountains, fences, planters, and benches.

Groundskeeping workers who care for athletic fields keep natural and artificial turf in top condition, mark out boundaries, and paint turf with team logos and names before events. They mow, water, fertilize, and aerate the fields regularly. They must make sure that the underlying soil on fields with natural turf has the required composition to allow proper drainage and to support the grasses used on the field. In sports venues, they vacuum and disinfect synthetic turf after its use to prevent the growth of harmful bacteria, and they remove the turf and replace the cushioning pad periodically.

Groundskeepers in parks and recreation facilities care for lawns, trees, and shrubs; maintain playgrounds; clean buildings; and keep parking lots, picnic areas, and other public spaces free of litter. They also may erect and dismantle snow fences, and maintain swimming pools. These workers inspect buildings and equipment, make needed repairs, and keep everything freshly painted.

Some groundskeepers specialize in caring for cemeteries and memorial gardens. They dig graves to specified depths, generally using a backhoe. They mow grass regularly, apply fertilizers and other chemicals, prune shrubs and trees, plant flowers, and remove debris from graves.

Greenskeepers maintain golf courses. Their work is similar to that of groundskeepers, but they also periodically relocate holes on putting greens and maintain benches and tee markers along the course. In addition, greenskeepers keep canopies, benches, and tee markers repaired and freshly painted.

Pesticide handlers, sprayers, and applicators apply herbicides, fungicides, or insecticides on plants or the soil to prevent or control weeds, insects, and diseases. Those who work for chemical lawn or tree service firms are more specialized, inspecting lawns for problems and applying fertilizers, pesticides, and other chemicals to stimulate growth and prevent or control weeds, diseases, or insect infestations.

Tree trimmers and pruners, also called arborists, cut away dead or excess branches from trees or shrubs to clear utility lines, roads, and sidewalks. Although many workers strive to improve the appearance and health of trees and plants, some specialize in diagnosing and treating tree diseases. Others specialize in pruning, trimming, and shaping ornamental trees and shrubs. Tree trimmers and pruners use chainsaws, chippers, and stump grinders while on the job. When trimming near power lines, they usually work on truck-mounted lifts and use power pruners.

Carpenters construct and repair building frameworks and structures--such as stairways, doorframes, partitions, and rafters--made from wood and other materials. They also may install kitchen cabinets, siding, and drywall.

Carpenters typically do the following:

• Follow blueprints and building plans to meet the needs of clients
• Install structures and fixtures, such as windows and molding
• Measure, cut, or shape wood, plastic, fiberglass, drywall, and other materials
• Construct building frameworks, including wall studs, floor joists, and doorframes
• Help put up, level, and install building framework with the aid of large pulleys and cranes
• Inspect and replace damaged framework or other structures and fixtures
• Instruct and direct laborers and other construction trade helpers

Carpenters are one of the most versatile construction occupations, with workers usually doing a variety of tasks. For example, some carpenters insulate office buildings; others install drywall or kitchen cabinets in homes. Those who help construct large buildings or bridges often make the wooden concrete forms for cement footings or pillars. Some carpenters build braces and scaffolding for buildings.

Carpenters use many different hand and power tools to cut and shape wood, plastic, fiberglass, or drywall. They commonly use handtools, including squares, levels, and chisels, as well as many power tools, such as sanders, circular saws, and nail guns. Carpenters put materials together with nails, screws, staples, and adhesives, and do a final check of their work to ensure accuracy. They use a tape measure on every project because proper measuring increases productivity, reduces waste, and ensures that the pieces being cut are the proper size.

The following are types of carpenters:

Residential carpenters typically specialize in new-home, townhome, and condominium building and remodeling. As part of a single job, they might build and set forms for footings, walls and slabs, and frame and finish exterior walls, roofs, and decks. They frame interior walls, build stairs, and install drywall, crown molding, doors, and kitchen cabinets. Highly-skilled carpenters may also tile floors and lay wood floors and carpet. Fully-trained construction carpenters are easily able to switch from new-home building to remodeling.

Commercial carpenters typically remodel and help build commercial office buildings, hospitals, hotels, schools, and shopping malls. Some specialize in working with light gauge and load-bearing steel framing for interior partitions, exterior framing, and curtain wall construction. Others specialize in working with concrete forming systems and finishing interior and exterior walls, partitions, and ceilings. Highly skilled carpenters can usually do many of the same tasks as residential carpenters.

Industrial carpenters typically work in civil and industrial settings where they put up scaffolding and build and set forms for pouring concrete. Some industrial carpenters build tunnel bracing or partitions in underground passageways and mines to control the circulation of air to worksites. Others build concrete forms for tunnels, bridges, dams, power plants, or sewer construction projects.

Woodworkers build a variety of products, such as cabinets and furniture, using wood.

Woodworkers typically do the following:

• Read detailed schematics and blueprints
• Prepare and set up equipment
• Lift wood pieces onto machines, either by hand or with hoists
• Operate wood-making and cutting machines
• Listen for unusual sounds or detect excessive vibration
• Ensure that products meet specifications, making adjustments as necessary
• Use hand tools to trim pieces or assemble products
• Remove and replace dull saw blades

Despite the abundance of plastics, metals, and other materials, wood products continue to be an important part of our daily lives. Woodworkers make wood products, using lumber and synthetic wood materials. Many of these products are mass produced, including most furniture, kitchen cabinets, and musical instruments. Other products are custom made with specialized tools in small shops.

Although the term “woodworker” may evoke the image of a craftsman who builds ornate furniture using hand tools, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work.

Even specialized artisans generally use a variety of power tools in their work. Much of the work is done in a high-production assembly line facility, but there is also some work that is customized and does not lend itself to being made in an assembly line. Woodworkers are employed in every part of the secondary wood products industry, from sawmill to finished product, and their activities vary.

Woodworkers set up, operate, and tend all types of woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, and wood-nailing machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After wood parts are made, woodworkers add fasteners and adhesives and connect the pieces to form a complete unit. They then sand, stain, and, if necessary, coat the wood product with a sealer, such as a lacquer or varnish.

Many of these tasks are handled by different workers with specialized training.

The following are types of woodworkers:

Cabinetmakers and bench carpenters cut, shape, assemble, and make parts for wood products. They often design and create sets of cabinets that are customized for particular spaces. In some cases, their duties begin with designing a set of cabinets to specifications and end with installing them.

Furniture finishers shape, finish, and refinish damaged and worn furniture. They often work with antiques and must judge how to best preserve and repair them. They also do the staining and sealing at the end of the process of making wooden products.

Wood sawing machine setters, operators, and tenders specialize in operating specific pieces of woodworking machinery. They often operate computerized numerical control (CNC) machines.

Woodworking machine setters, operators, and tenders, except sawing, operate woodworking machines, such as drill presses, lathes, routers, sanders, and planers.

Painters apply paint, stain, and coatings to walls, buildings, bridges, and other structures.

Painters typically do the following:

• Cover floors and furniture with drop-cloths and tarps to protect surfaces
• Remove fixtures such as pictures, door knobs, or electric switch covers
• Put up scaffolding and set up ladders
• Fill holes and cracks with caulk, putty, plaster, or other compounds
• Prepare surfaces by scraping, wire brushing, or sanding to a smooth finish
• Calculate the area to be painted and the amount of paint needed
• Apply primers or sealers so the paint will adhere
• Choose and mix paints and stains to reach desired color and appearance
• Apply paint or other finishes using hand brushes, rollers, or sprayers

Applying paint to interior walls makes surfaces attractive and vibrant. In addition, paints and other sealers protect exterior surfaces from erosion caused by exposure to the weather.

Because there are several ways to apply paint, workers must be able to choose the proper tool for each job, such as the correct roller, power sprayer, and the right size brush. Choosing the right tool typically depends on the surface to be covered and the characteristics of the finish.

A few painters--mainly industrial--must use special safety equipment. For example, painting in confined spaces such as the inside of a large storage tank, requires workers to wear self-contained suits to avoid inhaling toxic fumes. When painting bridges, tall buildings, or oil rigs, painters may work from scaffolding, bosun's chairs, and harnesses to reach work areas.

The following are examples of types of painters:  

Construction painters apply paints, stains, and coatings to interior and exterior walls, new buildings, and other structural surfaces.

Maintenance painters remove old finishes and apply paints, stains, and coatings later in a structure's life. Some painters specialize in painting or coating industrial structures, such as bridges and oil rigs, to prevent corrosion.

Artisan painters specialize in creating distinct finishes by using one of many decorative techniques. One technique is adding glaze for added depth and texture. Other common techniques may include sponging, distressing, rag-rolling, color blocking, and faux finishes. 

Painting and coating workers apply materials to manufactured products, such as furniture, toys and pottery, as well as transportation equipment including trucks, buses, boats, and airplanes. For more information about these painters, see the profile on painting and coating workers.