Plumbers, pipefitters, and steamfitters install and repair pipes that carry water, steam, air, or other liquids or gases to and in businesses, homes, and factories.
Plumbers, pipefitters, and steamfitters typically do the following:
Although plumbers, pipefitters, and steamfitters are three distinct specialties, their duties are often similar. For example, they all install pipes and fittings that carry water, steam, air, or other liquids or gases. They connect pipes, determine the necessary materials for a job, and perform pressure tests to ensure a pipe system is airtight and watertight.
Plumbers, pipefitters, and steamfitters install, maintain, and repair many different types of pipe systems. Some of these systems carry water, dispose of waste, supply gas to ovens, or heat and cool buildings. Other systems, such as those in power plants, carry the steam that powers huge turbines. Pipes also are used in manufacturing plants to move acids, gases, and waste byproducts through the production process.
Master plumbers on construction jobs may be involved with developing blueprints that show where all the pipes and fixtures will go. Their input helps ensure that a structure's plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires.
Plumbers and fitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power-plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
Plumbers and fitters sometimes cut holes in walls, ceilings, and floors. With some pipe systems, workers may hang steel supports from ceiling joists to hold the pipe in place. Because pipes are seldom manufactured to the exact size or length, plumbers and fitters measure and then cut and bend lengths of pipe as needed. Their tools include saws, pipe cutters, and pipe-bending machines.
They then connect the pipes, using methods that vary by type of pipe. For example, copper pipe is joined with solder, but steel pipe is often screwed together.
In addition to installation and repair work, journey- and master-level plumbers, pipefitters, and steamfitters often direct apprentices and helpers.
Following are examples of occupational specialties:
Plumbers install and repair water, drainage, and gas pipes in homes, businesses, and factories. They install and repair large water lines, such as those that supply water to buildings, and smaller ones, including ones that supply water to refrigerators. Plumbers also install plumbing fixtures--bathtubs, showers, sinks, and toilets--and appliances such as dishwashers, garbage disposals, and water heaters. They also fix plumbing problems. For example, when a pipe is clogged or leaking, plumbers remove the clog or replace the pipe. Some plumbers maintain septic systems, the large, underground holding tanks that collect waste from houses not connected to a city or county's sewer system.
Pipefitters install and maintain pipes that carry chemicals, acids, and gases. These pipes are mostly in manufacturing, commercial, and industrial settings. They often install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize:
Electrical and electronics installers and repairers install, repair, or replace a variety of electrical equipment in telecommunications, transportation, utilities, and other industries.
Electrical and electronics installers and repairers typically do the following:
Electrical and electronics installers and repairers work on complex pieces of electronic equipment.
Automated electronic control systems are becoming increasingly complex. As a result, repairers use software programs and testing equipment to diagnose malfunctions. Among their diagnostic tools are multimeters--which measure voltage, current, and resistance--and advanced multimeters, which measure the capacitance, inductance, and current gain of transistors.
Repairers also use signal generators, which provide test signals, and oscilloscopes, which display signals graphically. In addition, repairers use handtools such as pliers, screwdrivers, soldering irons, and wrenches to replace faulty parts and adjust equipment.
Commercial and industrial equipment electrical and electronics repairers repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas.
Electrical and electronics installers and repairers of transportation equipment install, adjust, or maintain mobile communication equipment, including sound, sonar, security, navigation, and surveillance systems on trains, watercraft, or other vehicles.
Powerhouse, substation, and relay electrical and electronics repairers inspect, test, maintain, or repair electrical equipment used in generating stations, substations, and inservice relays. These workers may be known as powerhouse electricians, relay technicians, or power transformer repairers.
Electric motor, power tool, and related repairers--such as armature winders, generator mechanics, and electric golf cart repairers--specialize in installing, maintaining, and repairing electric motors, wiring, or switches.
Electronic equipment installers and repairers of motor vehicles install, diagnose, and repair sound, security, and navigation equipment in motor vehicles. Motor vehicle installers and repairers work with an increasingly complex range of electronic equipment, including DVD players, navigation systems, and passive and active security systems.
Electrical and electronic installers and repairers may specialize, according to how and where they work:
Field technicians often travel to factories or other locations to repair equipment. When equipment breaks down, field technicians go to a customer's site to repair the equipment. Because repairing components is a complex activity, workers on the factory floor usually remove and replace defective units, such as circuit boards, instead of fixing them. Defective units are discarded or returned to the manufacturer or a specialized shop for repair.
Bench technicians work in repair shops in factories and service centers, fixing components that cannot be repaired on the factory floor. These workers also locate and repair circuit defects, such as poorly soldered joints, blown fuses, or malfunctioning transistors.
Watch and Clock Repairers repair, clean, and adjust mechanisms of timing instruments, such as watches and clocks.
Home appliance repairers install and repair household appliances, such as refrigerators, microwaves, and washer and dryers.
Home appliance repairers typically do the following:
Home appliance repairers, often called home appliance repair technicians, usually travel to customers' homes to do their work. They use many basic handtools, including screwdrivers, wrenches, and pliers, to determine the cause of unusual noises, leaks, or excessive vibration. Some use more specialized tools, such as ammeters, voltmeters, and wattmeters, to check for electrical problems. After identifying problems, workers repair or replace defective belts, motors, heating elements, switches, gears, or other items. They also may tighten, align, clean, and lubricate parts as necessary.
Most technicians explain to clients how to use a new appliance. If necessary, they may show clients how to use different functions of a newly repaired appliance.
Technicians also keep records of bills, payments, parts used, and hours worked. If an appliance is under warranty, a technician may need to contact the appliance's manufacturer to be paid for the work they did.
When working on refrigerators and window air conditioners, repairers are required by law to conserve, recover, and recycle chlorofluorocarbon (CFC) and hydrofluorocarbon (HCFC) refrigerants used in cooling systems. Federal regulations also require that home appliance repair technicians document the capture and disposal of refrigerants. For more information, see the profile on heating, air conditioning, and refrigeration mechanics and installers.
Glaziers install glass in windows, skylights, storefronts, and display cases to create distinctive designs or reduce the need for artificial lighting.
Glaziers typically do the following:
Glass has many uses in modern life. For example, insulated and specially treated glass keeps in warm or cool air and controls sound and condensation. Tempered and laminated glass makes doors and windows more secure. The creative use of large windows, glass doors, skylights, and sunroom additions makes buildings bright, airy, and inviting. Glaziers specialize in installing these different glass products.
In homes, glaziers install or replace windows, mirrors, shower doors, and bathtub enclosures. They fit glass for tabletops and display cases. On commercial interior projects, glaziers install items such as heavy, often etched, decorative room dividers or security windows. Glazing projects also may involve replacing storefront windows for supermarkets, auto dealerships, banks, and so on.
Workers who replace and repair glass in motor vehicles are not covered in this profile. For more information, see the profile on automotive body and glass repairers.
For most large scale construction jobs, glass is precut and mounted into frames at a factory or a contractor's shop. The finished glass arrives at the jobsite ready for glaziers to position and secure into place. Using cranes or hoists with suction cups, workers lift large, heavy pieces of glass for installation. In cases where the glass is not secure inside the frame, glaziers may attach steel and aluminum sashes or frames to the building, and then secure the glass with clips, moldings, or other types of fasteners.
A few glaziers work with plastics, granite, marble, and other materials used as glass substitutes. Some work with films or laminates that improve the durability or safety of the glass.