Jolly Junker Express

Automotive body and glass repairers restore, refinish, and replace vehicle bodies and frames, windshields, and window glass.

Automotive body and glass repairers typically do the following:

• Review damage reports, prepare cost estimates, and plan work
• Remove damaged body parts, including bumpers, fenders, hoods, grilles, and trim
• Realign car frames and chassis to repair structural damage
• Hammer out or patch dents, dimples, and other minor body damage
• Fit, attach, and weld replacement parts into place
• Install and weatherproof windows and windshields
• Grind, sand, buff, and prime refurbished and repaired surfaces
• Apply new finish to restored body parts

Automotive body and glass repairers can repair most damage from everyday vehicle collisions and make vehicles look and drive like new. Damage may be minor, such as replacing a cracked windshield, or major, such as replacing an entire door panel.

Repair technicians use many tools for their work. To remove damaged parts, such as bumpers and door panels, they use pneumatic tools, metal-cutting guns, and plasma cutters. For major structural repairs, such as aligning the body, they often use heavy-duty hydraulic jacks and hammers. For some work, they use common handtools, such as metal files, pliers, wrenches, hammers, and screwdrivers.

In some cases, repair technicians do an entire job by themselves. In other cases, especially in large shops, they use an assembly line approach in which they work as a team with each repair technician specializing.

Although repair technicians sometimes prime and paint repaired parts, automotive painters generally perform these tasks. For more information, see the profile on painting and coating workers.

The following are occupational specialties: 

Automotive body and related repairers, or collision repair technicians, straighten metal panels, remove dents, and replace parts that cannot be fixed. Although they repair all types of vehicles, most work primarily on cars, sport utility vehicles, and small trucks. 

Automotive glass installers and repairers remove and replace broken, cracked, or pitted windshields and window glass. They also weatherproof newly installed windows and windshields with chemical treatments.

Automotive service technicians and mechanics, often called service technicians or service techs, inspect, maintain, and repair cars and light trucks.  

Automotive service technicians and mechanics typically do the following:

• Test parts and systems to ensure that they are working properly
• Identify mechanical problems, often by using computerized diagnostic equipment
• Follow checklists to ensure that all critical parts are examined
• Test and lubricate the vehicle's engine and other major components
• Perform basic care and maintenance, including oil changes, tuneups, and tire rotations
• Repair or replace worn parts, such as brake pads and wheel bearings
• Disassemble and reassemble parts
• Use testing equipment to ensure that repairs and maintenance are effective
• Explain to clients their automotive problems and the repairs done on their vehicles

Service technicians work on traditional mechanical components, such as engines, transmissions, belts, and hoses. However, they must also be familiar with a growing number of electronic systems. Braking, transmission, and steering systems, for example, are controlled primarily by computers and electronic components.

Other integrated electronic systems, such as accident-avoidance sensors, are becoming common as well. In addition, a growing number of technicians are required to work on vehicles that run on alternative fuels, such as ethanol and electricity.

Service technicians use many different tools, including computerized diagnostic tools and power tools such as pneumatic wrenches, lathes, welding torches, and jacks and hoists. These tools usually are owned by their employers.

Service technicians also use many common handtools, such as pliers, wrenches, and screwdrivers, which generally are their own. In fact, experienced workers often have thousands of dollars invested in their personal tool collection.

Service technicians sometimes specialize in a particular type of repair that may be subject to specific regulations or procedures. For instance, those focused on air-conditioning system repairs must follow federal and state regulations governing the handling, recycling, and disposal of refrigerants.

In some shops, technicians may specialize. The following are types of service technicians:

Automotive air-conditioning repairers install and repair air conditioners and service parts, such as compressors, condensers, and controls. They are trained in government regulations related to their work.

Brake repairers adjust brakes, replace brake linings and pads, and make other repairs on brake systems. Some technicians specialize in both brake and front-end work. 

Front-end mechanics align and balance wheels and repair steering mechanisms and suspension systems. They frequently use special alignment equipment and wheel-balancing machines.

Transmission technicians and rebuilders work on gear trains, couplings, hydraulic pumps, and other parts of transmissions. Extensive knowledge of computer controls, the ability to diagnose electrical and hydraulic problems, and other specialized skills are needed to work on these complex components.

Tune-up technicians adjust ignition timing and valves and adjust or replace spark plugs and other parts to ensure efficient engine performance. They often use electronic testing equipment to isolate and adjust malfunctions in fuel, ignition, and emissions control systems.

For information about technicians who work on large trucks and buses, see the profile on diesel service technicians and mechanics.

For information about technicians who work on farm equipment, construction vehicles, and rail cars, see the profile on heavy vehicle and mobile equipment service technicians.

For information about technicians who repair and service motorcycles, motorboats, and small all-terrain vehicles, see the profile on small engine mechanics.

Hazardous materials (hazmat) removal workers identify and dispose of asbestos, radioactive and nuclear waste, arsenic, lead, and other hazardous materials. They also clean up materials that are flammable, corrosive, reactive, or toxic.

Hazmat removal workers typically do the following:

• Comply with safety procedures and federal laws regarding waste disposal
• Construct scaffolding or build containment areas before cleaning up
• Remove or clean up hazardous materials that are found or spilled
• Clean contaminated equipment for reuse
• Operate equipment that removes and stores waste materials
• Keep records of cleanup activities

Hazmat removal workers clean up materials that are harmful to people and the environment. The work they do depends on the substances they are cleaning. Removing lead and asbestos is different from cleaning up radiation contamination and toxic spills. Differences also can relate to why these workers have been called in to clean a site. For example, cleaning up a fuel spill from a train derailment is more urgent than removing lead paint from a bridge.

The following are types of hazmat removal workers:

Asbestos abatement workers and lead abatement workers remove asbestos and lead from buildings that are going to be fixed up or taken down. Most of this work is in older buildings that were originally built with asbestos insulation and lead-based paints--both of which are now banned from being used in newer buildings and must be removed from older ones.

Until the 1970s, asbestos was often used in buildings for fireproofing, insulation, and other uses. However, asbestos particles can cause deadly lung diseases. Similarly, until the 1970s, lead was commonly used in paint, pipes, and plumbing fixtures. Inhaling lead dust or ingesting chips of lead-based paint can cause serious health problems, though, especially in children.

Lead abatement workers use chemicals and may need to know how to operate sandblasters, high-pressure water sprayers, and other common tools.

Decommissioning and decontamination workers remove and treat radioactive materials generated by nuclear facilities and powerplants. They break down contaminated items such as “gloveboxes,” which are used to process radioactive materials. When a facility is being closed or decommissioned (taken out of service), these workers clean the facility and decontaminate it from radioactive materials.

Decontamination technicians do tasks similar to those of janitors and cleaners, but the items and areas they clean are radioactive. Some of these jobs are now being done by robots controlled by people away from the contamination site. Increasingly, many of these remote devices automatically monitor and survey floors and walls for contamination.

Emergency and disaster response workers must work quickly to clean up hazardous materials after train and trucking accidents. Immediate, thorough cleanups help to control and prevent more damage to accident or disaster sites.

Radiation-protection technicians use radiation survey meters and other remote devices to locate and assess the hazard associated with radiated materials, operate high-pressure cleaning equipment for decontamination, and package radioactive materials for moving or disposing.

Treatment, storage, and disposal workers transport and prepare materials for treatment, storage, or disposal. To ensure proper treatment of materials, workers must follow laws enforced by the U.S. Environmental Protection Agency (EPA) or the U.S. Occupational Safety and Health Administration (OSHA). At incinerator facilities, treatment, storage, and disposal workers move materials from the customer or service center to the incinerator. At landfills, they organize and track the location of items in the landfill and may help change the state of a material from liquid to solid to prepare it to be stored. These workers typically operate heavy machinery, such as forklifts, earthmoving machinery, and large trucks and rigs.

Mold remediation makes up a small segment of hazardous materials removal work. Although mold is present in almost all structures and is not usually defined as a hazardous material, some mold--especially the types that cause allergic reactions--can infest a building to such a degree that extensive efforts must be taken to remove it safely.

Auctioneers sell articles or farm products at auction to highest bidder. Appraise merchandise before sale and assemble merchandise in lots according to estimated value of individual items. Select articles to be auctioned at suggestion of bidders or by own choice. Appraise items, provide background information, ask for starting price, continue to ask for bids, and close sale to highest bidder.

Construction laborers and helpers do many basic tasks that require physical labor on construction sites.

Construction laborers and helpers typically do the following:

• Clean and prepare construction sites by removing debris and possible hazards
• Load or unload building materials to be used in construction
• Build or take apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
• Dig trenches, backfill holes, or compact earth to prepare for construction
• Operate or tend equipment and machines used in construction, such as concrete mixers
• Help other craftworkers with their duties
• Follow construction plans and instructions from the people they are working for

Construction laborers and helpers work on almost all construction sites, doing a wide range of tasks from the very easy to the extremely difficult and hazardous. Although many of the tasks they do require some training and experience, most jobs usually require little skill and can be learned quickly. 

The following are occupational specialties:

Construction laborers do a variety of construction-related activities during all phases of construction. Although most laborers are generalists--such as those who install barricades, cones, and markers to control traffic patterns--many others specialize. For example, those who operate the machines and equipment that lay concrete or asphalt on roads are more likely to specialize in those areas.

Most construction laborers work in the following areas:

• Building homes and businesses
• Tearing down buildings
• Removing hazardous materials
• Building highways and roads
• Digging tunnels and mine shafts

Construction laborers use a variety of tools and equipment. Some tools are simple, such as brooms and shovels; other equipment is more sophisticated, such as pavement breakers, jackhammers, earth tampers, and surveying equipment.

With special training, laborers may help transport and use explosives or run hydraulic boring machines to dig out tunnels. They may learn to use laser beam equipment to place pipes and use computers to control robotic pipe cutters. They may become certified to remove asbestos, lead, or chemicals.

Helpers assist construction craftworkers, such as electricians and carpenters, with a variety of basic tasks. They may carry tools and materials or help set up equipment. For example, many helpers work with cement masons to move and set forms. Many other helpers assist with taking apart equipment, cleaning up sites, and disposing of waste, as well as helping with any other needs of craftworkers.

Many construction trades have helpers who assist craftworkers. The following are examples of trades that have associated helpers:

• Brickmasons, blockmasons, stonemasons, and tile and marble setters
• Carpenters
• Electricians
• Painters, paperhangers, plasterers, and stucco masons
• Pipelayers, plumbers, pipefitters, and steamfitters
• Roofers