Line Installers and Repairers

Line installers and repairers install or repair electrical power systems and telecommunications cables, including fiber optics.

Electrical power-line installers and repairers typically do the following:

  • Drive work vehicles to job sites
  • Install, maintain, or repair the power lines that move and distribute electricity
  • Identify defective devices, circuit breakers, fuses, voltage regulators, transformers, and switches
  • Inspect and test power lines and auxiliary equipment
  • String power lines between poles, towers, and buildings
  • Climb poles and transmission towers and use truck-mounted buckets to get to equipment
  • Operate power equipment when installing and repairing poles, towers, and lines
  • Follow safety standards and procedures

Telecommunications line installers and repairers typically do the following:

  • Drive work vehicles to job sites
  • Install, maintain, or repair telecommunications equipment
  • Inspect or test lines or cables
  • Lay underground cable, including fiber optic lines, directly in trenches
  • Operate power equipment when installing and repairing poles, towers, and lines
  • Set up service for customers

Every time you turn on your lights, call someone on the phone, watch cable television, or access the Internet, you are connecting to complex networks of physical power lines and cables that provide you with electricity and connect you with the outside world. Line installers and repairers, also known as line workers or linemen, are the people who install and maintain these networks.

Line installers and repairers typically specialize, and the areas in which they specialize depend on the network and industry in which they work:

Electrical power-line installers and repairers install and maintain the power grid--the network of power lines that moves electricity from generating plants to customers. They routinely work with high-voltage electricity, which requires extreme caution. This can range from hundreds of thousands of volts for the long-distance transmission lines that make up the power grid to less than 10,000 volts for distribution lines that supply electricity to homes and businesses.

Line workers who maintain the interstate power grid work in crews that travel to work locations throughout a large region to take care of transmission lines and towers. Workers employed by local utilities work mainly with lower voltage distribution lines, maintaining equipment such as transformers, voltage regulators, and switches. They may also work on traffic lights and street lights.

Telecommunications line installers and repairers install and maintain the lines and cables used by local and long-distance telephone services, cable television, the Internet, and other communications networks. These services use different types of cables, including fiber-optic cables. Unlike metallic cables that carry electricity, fiber-optic cables are made of glass or plastic and transmit signals using light. Working with fiber optics requires special skills, such as the ability to splice and finish off optical cables. Additionally, workers test and troubleshoot cables and networking equipment.

Because these systems are so complicated, many line workers also specialize by duty:

Line installers install new cable. They may work for construction contractors, utilities, or telecommunications companies. They generally start a new job by digging underground trenches or putting up utility poles and towers to carry the wires and cables. They use a variety of construction equipment, including digger derricks, which are trucks equipped with augers and cranes used to dig holes in the ground and set poles in place. Line installers also use trenchers, cable plows, and directional bore machines, which are used to cut openings in the earth to lay underground cables. Once the poles, towers, tunnels, or trenches are ready, line installers string cable along poles and towers or through tunnels and trenches.

Line repairers are employed by utilities and telecommunications companies that maintain existing power and telecommunications lines. Maintenance needs may be identified in a variety of ways, including remote monitoring equipment, inspections by airplane or helicopter, and customer reports of service outages. Line repairers often must replace aging or outdated equipment, so many of these workers have installation duties in addition to their repair duties.

When a problem is reported, line repairers must identify the cause and fix it. This usually involves testing equipment and replacing it as necessary. To work on poles, line installers usually use bucket trucks to raise themselves to the top of the structure, although all line workers must be adept at climbing poles and towers when necessary. Workers use special safety equipment to keep them from falling when climbing utility poles and towers.

Storms and other natural disasters can cause extensive damage to networks of power lines. When a connection goes out, line repairers must work quickly to restore service to customers.


Electrical and Electronics Engineers

Electrical engineers design, develop, test, and supervise the manufacturing of electrical equipment such as electric motors, radar and navigation systems, communications systems, or power generation equipment. Electrical engineers also design the electrical systems of automobiles and aircraft.

Electronics engineers design and develop electronic equipment such as broadcast and communications systems, from portable music players to global positioning systems (GPS). Many also work in areas closely related to computer hardware.

Electrical engineers typically do the following:

  • Design new ways to use electrical power to develop or improve products
  • Do detailed calculations to compute manufacturing, construction, and installation standards and specifications
  • Direct manufacturing, installing, and testing to ensure that the product as built meets specifications and codes
  • Investigate complaints from customers or the public, evaluate problems, and recommend solutions
  • Work with project managers on production efforts to ensure projects are completed satisfactorily, on time, and within budget

Electronics engineers typically do the following:

  • Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications
  • Analyze electrical system requirements, capacity, cost, and customer needs and then develop a system plan
  • Develop maintenance and testing procedures for electronic components and equipment
  • Evaluate systems and recommend repair or design modifications
  • Inspect electronic equipment, instruments, and systems to make sure they meet safety standards and applicable regulations
  • Plan and develop applications and modifications for electronic properties used in parts and systems to improve technical performance

Electronics engineers who work for the federal government research, develop, and evaluate electronic devices used in diverse technologies, such as aviation, computing, transportation, and manufacturing. They work on federal electronic devices and systems, including satellites, flight systems, radar and sonar systems, and communications systems.

The work of electrical engineers and electronics engineers is often similar. Both use engineering and design software and equipment to do engineering tasks. Both types of engineers must also work with other engineers to discuss existing products and possibilities for engineering projects.

Engineers whose work is related exclusively to computer hardware are considered computer hardware engineers. For more information about this occupation, see the profile on computer hardware engineers.


Power Plant Operators, Distributors, and Dispatchers

Power plant operators, dispatchers, and distributors control the systems that generate and distribute electric power.

Power plant operators, distributors, and dispatchers typically do the following:

  • Control power-generating equipment, such as boilers, turbines, generators, and reactors
  • Read charts, meters, and gauges to monitor voltage and electricity flows
  • Check equipment and indicators to detect evidence of operating problems
  • Adjust controls to regulate the flow of power
  • Start or stop generators, turbines, and other equipment as necessary

Electricity is one of our nation's most vital resources. Power plant operators, distributors, and dispatchers control power plants and the flow of electricity from plants to substations, which distribute electricity to businesses, homes, and factories. Electricity is generated from many sources, including coal, gas, nuclear energy, hydroelectric energy (from water sources), and wind and solar power.

The following are types of power plant operators, distributors, and dispatchers:

Nuclear power reactor operators control nuclear reactors. They adjust control rods, which affect how much electricity a reactor generates. They monitor reactors, turbines, generators, and cooling systems, adjusting controls as necessary. Operators also start and stop equipment and record the data. They may need to respond to abnormalities, determine the cause, and take corrective action.

Power distributors and dispatchers, also known as systems operators, control the flow of electricity as it travels from generating stations to substations and users over a network of transmission and distribution lines. They prepare and issue switching orders to route electrical currents around areas that need maintenance or repair. Distributors and dispatchers also monitor and operate current converters, voltage transformers, and circuit breakers. They must detect and respond to emergencies, such as transformer or transmission line failures.

Power plant operators control, operate, and maintain machinery to generate electric power. They use control boards to distribute power among generators and regulate the output from several generators. They regulate the flow of power between generating stations and substations, and they monitor instruments to maintain voltage and electricity flows from the plant.


Electricians

Electricians install and maintain electrical systems in homes, businesses, and factories.

Electricians typically do the following:

  • Read blueprints or technical diagrams before doing work
  • Install and maintain wiring and lighting systems
  • Inspect electrical components, such as transformers and circuit breakers
  • Identify electrical problems with a variety of testing devices
  • Repair or replace wiring, equipment, or fixtures using hand tools and power tools
  • Follow state and local building regulations based on the National Electric Code
  • Direct and train workers to install, maintain, or repair electrical wiring or equipment

Almost every building has an electrical system that is installed during construction and maintained after that. Electricians do both the installing and maintaining of electrical systems.

Installing electrical systems is less complicated than maintaining older equipment. This is because it is easier to get to electrical wiring during construction. Maintaining older equipment, however, involves identifying problems and repairing malfunctioning equipment that is sometimes difficult to reach. Electricians doing maintenance work may need to fix or replace outlets, circuit breakers, motors, or robotic control systems.

Electricians read blueprints, which are technical diagrams of electrical systems that show the location of circuits, outlets, and other equipment. They use different types of hand and power tools, such as pipe benders, to run and protect wiring. Other commonly used hand and power tools include screwdrivers, wire strippers, drills, and saws. While troubleshooting, electricians also may use ammeters, voltmeters, and multimeters to find problems and ensure that components are working properly.

Many electricians work independently, but sometimes they collaborate with others. For example, experienced electricians may work with building engineers and architects to help design electrical systems in new construction. Some electricians also may consult with other construction specialists, such as elevator installers and heating and air conditioning workers, to help install or maintain electrical or power systems. At larger companies, electricians are more likely to work as part of a crew; they may direct helpers and apprentices to complete jobs.

The following are examples of occupational specialties:

Inside electricians maintain and repair large motors, equipment, and control systems in businesses and factories. They use their knowledge of electrical systems to help these facilities run safely and efficiently. Some also install the wiring for businesses and factories that are being built. To minimize equipment failure, inside electricians often perform scheduled maintenance.   

Residential electricians install wiring and troubleshoot electrical problems in peoples' homes. Those who work in new-home construction install outlets and provide access to power where needed. Those who work in maintenance and remodeling repair and replace faulty equipment. For example, if a circuit breaker is tripped, electricians determine the reason and fix it.


Computer, ATM, and Office Machine Repairers

Computer, ATM, and office machine repairers install, fix, and maintain many of the machines that businesses, households, and other consumers use.

Computer, ATM, and office machine repairers typically do the following:

  • Travel to customers' locations in response to service requests
  • Communicate with customers to determine the source of a problem
  • Do administrative tasks, such as completing work order forms
  • Use a variety of tools, such as a multimeter, to help diagnose the problem
  • Install large equipment, such as mainframe computers and ATMs
  • Explain the basic functions of machines and equipment to customers
  • Replace malfunctioning machine parts, such as video cards in desktop computers or keypads on ATM machines
  • Provide preventative maintenance, such as cleaning the internal parts of machines
  • Test newly installed systems to make sure they work properly

In most cases, machines do not break down entirely. Often just one broken part can keep a machine from working properly. Repairers often fix machines by replacing these parts and other defective equipment because it is often less expensive than replacing the entire machine.

Although the work of computer, ATM, and office machine repairers is very similar, the exact tasks differ depending on the type of equipment. For example, computer repairers often must replace desktop parts, such as a motherboard, because of hardware failure. ATM repairers may replace a worn magnetic head on a card reader to allow an ATM to recognize customers' bank cards. Office machine repairers replace parts of office machines that break down from general wear and tear, such as the printheads of inkjet printers.

Some repairers have assigned areas where they do preventive maintenance on a regular basis.

Computer repairers service and repair computer parts, network connections, and computer equipment, such as an external hard drive or computer monitor. Computer repairers must be familiar with various operating systems and commonly used software packages. Some work from repair shops, while others travel to customers' locations.

ATM repairers install and repair automated teller machines and, increasingly, electronic kiosks. They often work with a network of ATMs and travel to ATM locations when they are alerted to a malfunction.

Office machine repairers fix machinery at customers' workplaces because these machines are often large and stationary, such as office printers or copiers. Office machines often need preventive maintenance, such as cleaning, or replacement of commonly used parts as they break down from general wear and tear.


U.S. ForensicNationwide Overspray