Marshall Brothers Home Services

(901) 356-4137

CLICK HERE TO CLAIM THIS LISTING
Addresses Found 3490 Plum Point Dr E, Olive Branch, MS 38654 4166 Getwell Rd, Memphis, TN 38118 8611 Saddlecreek Dr, Olive Branch, MS 38654

Construction Laborers and Helpers

Construction laborers and helpers do many basic tasks that require physical labor on construction sites.

Construction laborers and helpers typically do the following:

  • Clean and prepare construction sites by removing debris and possible hazards
  • Load or unload building materials to be used in construction
  • Build or take apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
  • Dig trenches, backfill holes, or compact earth to prepare for construction
  • Operate or tend equipment and machines used in construction, such as concrete mixers
  • Help other craftworkers with their duties
  • Follow construction plans and instructions from the people they are working for

Construction laborers and helpers work on almost all construction sites, doing a wide range of tasks from the very easy to the extremely difficult and hazardous. Although many of the tasks they do require some training and experience, most jobs usually require little skill and can be learned quickly. 

The following are occupational specialties:

Construction laborers do a variety of construction-related activities during all phases of construction. Although most laborers are generalists--such as those who install barricades, cones, and markers to control traffic patterns--many others specialize. For example, those who operate the machines and equipment that lay concrete or asphalt on roads are more likely to specialize in those areas.

Most construction laborers work in the following areas:

  • Building homes and businesses
  • Tearing down buildings
  • Removing hazardous materials
  • Building highways and roads
  • Digging tunnels and mine shafts

Construction laborers use a variety of tools and equipment. Some tools are simple, such as brooms and shovels; other equipment is more sophisticated, such as pavement breakers, jackhammers, earth tampers, and surveying equipment.

With special training, laborers may help transport and use explosives or run hydraulic boring machines to dig out tunnels. They may learn to use laser beam equipment to place pipes and use computers to control robotic pipe cutters. They may become certified to remove asbestos, lead, or chemicals.

Helpers assist construction craftworkers, such as electricians and carpenters, with a variety of basic tasks. They may carry tools and materials or help set up equipment. For example, many helpers work with cement masons to move and set forms. Many other helpers assist with taking apart equipment, cleaning up sites, and disposing of waste, as well as helping with any other needs of craftworkers.

Many construction trades have helpers who assist craftworkers. The following are examples of trades that have associated helpers:

  • Brickmasons, blockmasons, stonemasons, and tile and marble setters
  • Carpenters
  • Electricians
  • Painters, paperhangers, plasterers, and stucco masons
  • Pipelayers, plumbers, pipefitters, and steamfitters
  • Roofers

Drywall and Ceiling Tile Installers, and Tapers

Drywall and ceiling tile installers hang wallboards to walls and ceilings inside buildings. Tapers prepare the wallboards for painting, using tape and other materials. Many workers do both installing and taping.

Drywall installers typically do the following:

  • Review design plans to minimize the number of cuts and waste of wallboard
  • Measure the location of electrical outlets, plumbing, windows, and vents
  • Cut drywall to the right size, using utility knives and power saws
  • Fasten drywall panels to interior wall studs, using nails or screws
  • Trim and smooth rough edges so boards join evenly

Ceiling tile installers typically do the following:

  • Measure according to blueprints or drawings
  • Nail or screw supports
  • Put tiles or sheets of shock-absorbing materials on ceilings  
  • Keep the tile in place with cement adhesive, nails, or screws

Tapers typically do the following:

  • Prepare wall surface (wallboard) by patching nail holes
  • Apply tape and use sealing compound to cover joints between wallboards
  • Apply additional coats of sealing compound to create an even surface
  • Sand all joints and holes to a smooth, seamless finish

Installers are also called framers or hangers. Tapers are also called finishers. Ceiling tile installers are sometimes called acoustical carpenters because they work with tiles that block sound.

Once wallboards are hung, workers use increasingly wider trowels to spread multiple coats of spackle over cracks, indentations, and any remaining imperfections. Some workers may use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

To work on ceilings, drywall and ceiling tile installers and tapers may use mechanical lifts or stand on stilts, ladders, or scaffolds.


Plumbers, Pipefitters, and Steamfitters

Plumbers, pipefitters, and steamfitters install and repair pipes that carry water, steam, air, or other liquids or gases to and in businesses, homes, and factories.

Plumbers, pipefitters, and steamfitters typically do the following:

  • Install pipes and fixtures
  • Study blueprints and follow state and local building codes
  • Determine the amount of material and type of equipment needed
  • Inspect and test installed pipe systems and pipelines
  • Troubleshoot and repair systems that are not working
  • Replace worn parts

Although plumbers, pipefitters, and steamfitters are three distinct specialties, their duties are often similar. For example, they all install pipes and fittings that carry water, steam, air, or other liquids or gases. They connect pipes, determine the necessary materials for a job, and perform pressure tests to ensure a pipe system is airtight and watertight.

Plumbers, pipefitters, and steamfitters install, maintain, and repair many different types of pipe systems. Some of these systems carry water, dispose of waste, supply gas to ovens, or heat and cool buildings. Other systems, such as those in power plants, carry the steam that powers huge turbines. Pipes also are used in manufacturing plants to move acids, gases, and waste byproducts through the production process.

Master plumbers on construction jobs may be involved with developing blueprints that show where all the pipes and fixtures will go. Their input helps ensure that a structure's plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires.

Plumbers and fitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power-plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.

Plumbers and fitters sometimes cut holes in walls, ceilings, and floors. With some pipe systems, workers may hang steel supports from ceiling joists to hold the pipe in place. Because pipes are seldom manufactured to the exact size or length, plumbers and fitters measure and then cut and bend lengths of pipe as needed. Their tools include saws, pipe cutters, and pipe-bending machines.

They then connect the pipes, using methods that vary by type of pipe. For example, copper pipe is joined with solder, but steel pipe is often screwed together.

In addition to installation and repair work, journey- and master-level plumbers, pipefitters, and steamfitters often direct apprentices and helpers.

Following are examples of occupational specialties:

Plumbers install and repair water, drainage, and gas pipes in homes, businesses, and factories. They install and repair large water lines, such as those that supply water to buildings, and smaller ones, including ones that supply water to refrigerators. Plumbers also install plumbing fixtures--bathtubs, showers, sinks, and toilets--and appliances such as dishwashers, garbage disposals, and water heaters. They also fix plumbing problems. For example, when a pipe is clogged or leaking, plumbers remove the clog or replace the pipe. Some plumbers maintain septic systems, the large, underground holding tanks that collect waste from houses not connected to a city or county's sewer system.

Pipefitters install and maintain pipes that carry chemicals, acids, and gases. These pipes are mostly in manufacturing, commercial, and industrial settings. They often install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize:

  • Gasfitters install pipes that provide clean oxygen to patients in hospitals.
  • Sprinklerfitters install and repair fire sprinkler systems in businesses, factories, and residential buildings.
  • Steamfitters installpipe systems that move steam under high pressure. Most steamfitters work at campus and natural gas power plants where heat and electricity is generated, but others work in factories that use high-temperature steam pipes.

Interior Designers

Interior designers make interior spaces functional, safe, and beautiful for almost every type of building: offices, homes, airport terminals, shopping malls, and restaurants. They select and specify colors, finishes, fabrics, furniture, flooring and wallcoverings, lighting, and other materials to create useful and stylish interiors for buildings.

Interior designers typically do the following:

  • Determine the client's goals and requirements of the project
  • Consider how the space will be used and how people will move through the space
  • Sketch preliminary design plans
  • Specify materials and furnishings, such as lighting, furniture, wallcoverings, flooring, equipment, and artwork
  • Prepare final plans using computer applications
  • Create a timeline for the interior design project and estimate project costs
  • Oversee installing the design elements
  • Visit after the project to ensure that the client is satisfied
  • Search for and bid on new projects

Interior designers work closely with architects, structural engineers, and builders to determine how interior spaces will look and be furnished. Interior designers may read blueprints and must be aware of building codes and inspection regulations.

Although some sketches or drawings may be freehand, most interior designers use computer-aided design (CAD) software for the majority of their drawings.

Many designers specialize in particular types of buildings (homes, hospitals, or hotels), specific rooms (bathrooms or kitchens), or specific styles (early American or French Renaissance). Some designers work for home furnishings stores, providing design services to help customers choose materials and furnishings.

Some interior designers produce designs, plans, and drawings for construction and installation. This may include floor plans, lighting plans, or plans needed for building permits. Interior designers may draft the preliminary design into documents that could be as simple as sketches or as inclusive as construction documents, with schedules and attachments.

The following are examples of types of interior designers.

Sustainable designers use strategies to improve energy and water efficiencies and indoor air quality, and they specify environmentally preferable products such as bamboo or cork for floors. They may obtain certification in Leadership in Energy and Environmental Design (LEED) from the U.S. Green Building Council. Such certification indicates that a building or its interior space was designed with the use of sustainable concepts.

Universal designers renovate spaces to make them more accessible. Often, these designs are used to renovate spaces for elderly people or people with special needs; however, universal designs can benefit anyone. For example, an entry with no steps may be necessary for someone in a wheelchair, but it is also helpful for someone pushing a baby stroller.

Kitchen and bath designers specialize in kitchens and bathrooms and have expert knowledge of the variety of cabinets, fixtures, appliances, plumbing, and electrical solutions for these rooms.

Lighting designers focus on the effect of lighting for home, office, or public spaces. For example, lighting designers may work on stage productions, in gallery or museum spaces, or in health care facilities to find appropriate light fixtures and lighting effects for each space.

Closet designers design closet space for homes to maximize storage and increase orderliness. They work with both fixed structures and stand-alone storage systems.


Woodworkers

Woodworkers build a variety of products, such as cabinets and furniture, using wood.

Woodworkers typically do the following:

  • Read detailed schematics and blueprints
  • Prepare and set up equipment
  • Lift wood pieces onto machines, either by hand or with hoists
  • Operate wood-making and cutting machines
  • Listen for unusual sounds or detect excessive vibration
  • Ensure that products meet specifications, making adjustments as necessary
  • Use hand tools to trim pieces or assemble products
  • Remove and replace dull saw blades

Despite the abundance of plastics, metals, and other materials, wood products continue to be an important part of our daily lives. Woodworkers make wood products, using lumber and synthetic wood materials. Many of these products are mass produced, including most furniture, kitchen cabinets, and musical instruments. Other products are custom made with specialized tools in small shops.

Although the term “woodworker” may evoke the image of a craftsman who builds ornate furniture using hand tools, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work.

Even specialized artisans generally use a variety of power tools in their work. Much of the work is done in a high-production assembly line facility, but there is also some work that is customized and does not lend itself to being made in an assembly line. Woodworkers are employed in every part of the secondary wood products industry, from sawmill to finished product, and their activities vary.

Woodworkers set up, operate, and tend all types of woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, and wood-nailing machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After wood parts are made, woodworkers add fasteners and adhesives and connect the pieces to form a complete unit. They then sand, stain, and, if necessary, coat the wood product with a sealer, such as a lacquer or varnish.

Many of these tasks are handled by different workers with specialized training.

The following are types of woodworkers:

Cabinetmakers and bench carpenters cut, shape, assemble, and make parts for wood products. They often design and create sets of cabinets that are customized for particular spaces. In some cases, their duties begin with designing a set of cabinets to specifications and end with installing them.

Furniture finishers shape, finish, and refinish damaged and worn furniture. They often work with antiques and must judge how to best preserve and repair them. They also do the staining and sealing at the end of the process of making wooden products.

Wood sawing machine setters, operators, and tenders specialize in operating specific pieces of woodworking machinery. They often operate computerized numerical control (CNC) machines.

Woodworking machine setters, operators, and tenders, except sawing, operate woodworking machines, such as drill presses, lathes, routers, sanders, and planers.


Supportive Insurance ServicesHancock Claims Consultants