Basic Basement Company

Roofers repair and install the roofs of buildings using a variety of materials, including shingles, asphalt, and metal.

Roofers typically do the following:

• Inspect problem roofs to determine the best way to repair them
• Measure roof to calculate the quantities of materials needed
• Replace damaged or rotting joists or plywood
• Install vapor barriers or layers of insulation
• Install shingles, asphalt, metal, or other materials to make the roof watertight
• Align roofing materials with edges of the roof
• Cut roofing materials to fit angles formed by walls, vents, or intersecting roof surfaces
• Cover exposed nail or screw heads with roofing cement or caulk to prevent leakage

Properly installed roofs keep water from leaking into buildings and damaging the interior, equipment, or furnishings.

There are two basic types of roofs, low-slope and steep-slope:

• Low-slope: About two-thirds of all roofs are low-slope. Most commercial, industrial, and apartment buildings have low-slope roofs. Low-slope roofs rise 4 inches or less per horizontal foot and are installed in layers.
  
  For low-slope roofs, roofers typically use several layers of roofing materials or felt membranes stuck together with hot bitumen (a tar-like substance). They glaze the top layer to make a smooth surface or embed gravel in the hot bitumen to make a rough surface.
  
  An increasing number of low-slope roofs are covered with a single-ply membrane of waterproof rubber or thermoplastic compounds.

• Steep-slope: Most of the remaining roofs are steep-slope. Most single-family houses have steep-slope roofs. Steep-slope roofs rise more than 4 inches per horizontal foot.
  
  For steep-slope roofs, roofers typically use asphalt shingles, which often cost less than other coverings. On steep-slope roofs, some roofers also install tile, solar shingles, fiberglass shingles, metal shingles, or shakes (rough wooden shingles).
  
  To apply shingles, roofers first lay, cut, and tack 3-foot strips of roofing over the entire roof. Then, starting from the bottom edge, they nail overlapping rows of shingles to the roof.

A small but increasing number of buildings now have “green” roofs that incorporate landscape roofing systems. A landscape roofing system typically begins with a single or multiple waterproof layers. After that layer is proven to be leak free, roofers put a root barrier over it, and, finally, layers of soil, in which vegetation is planted. Roofers must ensure that the roof is watertight and can endure the weight and water needs of the plants.

Construction laborers and helpers do many basic tasks that require physical labor on construction sites.

Construction laborers and helpers typically do the following:

• Clean and prepare construction sites by removing debris and possible hazards
• Load or unload building materials to be used in construction
• Build or take apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
• Dig trenches, backfill holes, or compact earth to prepare for construction
• Operate or tend equipment and machines used in construction, such as concrete mixers
• Help other craftworkers with their duties
• Follow construction plans and instructions from the people they are working for

Construction laborers and helpers work on almost all construction sites, doing a wide range of tasks from the very easy to the extremely difficult and hazardous. Although many of the tasks they do require some training and experience, most jobs usually require little skill and can be learned quickly. 

The following are occupational specialties:

Construction laborers do a variety of construction-related activities during all phases of construction. Although most laborers are generalists--such as those who install barricades, cones, and markers to control traffic patterns--many others specialize. For example, those who operate the machines and equipment that lay concrete or asphalt on roads are more likely to specialize in those areas.

Most construction laborers work in the following areas:

• Building homes and businesses
• Tearing down buildings
• Removing hazardous materials
• Building highways and roads
• Digging tunnels and mine shafts

Construction laborers use a variety of tools and equipment. Some tools are simple, such as brooms and shovels; other equipment is more sophisticated, such as pavement breakers, jackhammers, earth tampers, and surveying equipment.

With special training, laborers may help transport and use explosives or run hydraulic boring machines to dig out tunnels. They may learn to use laser beam equipment to place pipes and use computers to control robotic pipe cutters. They may become certified to remove asbestos, lead, or chemicals.

Helpers assist construction craftworkers, such as electricians and carpenters, with a variety of basic tasks. They may carry tools and materials or help set up equipment. For example, many helpers work with cement masons to move and set forms. Many other helpers assist with taking apart equipment, cleaning up sites, and disposing of waste, as well as helping with any other needs of craftworkers.

Many construction trades have helpers who assist craftworkers. The following are examples of trades that have associated helpers:

• Brickmasons, blockmasons, stonemasons, and tile and marble setters
• Carpenters
• Electricians
• Painters, paperhangers, plasterers, and stucco masons
• Pipelayers, plumbers, pipefitters, and steamfitters
• Roofers

Carpenters construct and repair building frameworks and structures--such as stairways, doorframes, partitions, and rafters--made from wood and other materials. They also may install kitchen cabinets, siding, and drywall.

Carpenters typically do the following:

• Follow blueprints and building plans to meet the needs of clients
• Install structures and fixtures, such as windows and molding
• Measure, cut, or shape wood, plastic, fiberglass, drywall, and other materials
• Construct building frameworks, including wall studs, floor joists, and doorframes
• Help put up, level, and install building framework with the aid of large pulleys and cranes
• Inspect and replace damaged framework or other structures and fixtures
• Instruct and direct laborers and other construction trade helpers

Carpenters are one of the most versatile construction occupations, with workers usually doing a variety of tasks. For example, some carpenters insulate office buildings; others install drywall or kitchen cabinets in homes. Those who help construct large buildings or bridges often make the wooden concrete forms for cement footings or pillars. Some carpenters build braces and scaffolding for buildings.

Carpenters use many different hand and power tools to cut and shape wood, plastic, fiberglass, or drywall. They commonly use handtools, including squares, levels, and chisels, as well as many power tools, such as sanders, circular saws, and nail guns. Carpenters put materials together with nails, screws, staples, and adhesives, and do a final check of their work to ensure accuracy. They use a tape measure on every project because proper measuring increases productivity, reduces waste, and ensures that the pieces being cut are the proper size.

The following are types of carpenters:

Residential carpenters typically specialize in new-home, townhome, and condominium building and remodeling. As part of a single job, they might build and set forms for footings, walls and slabs, and frame and finish exterior walls, roofs, and decks. They frame interior walls, build stairs, and install drywall, crown molding, doors, and kitchen cabinets. Highly-skilled carpenters may also tile floors and lay wood floors and carpet. Fully-trained construction carpenters are easily able to switch from new-home building to remodeling.

Commercial carpenters typically remodel and help build commercial office buildings, hospitals, hotels, schools, and shopping malls. Some specialize in working with light gauge and load-bearing steel framing for interior partitions, exterior framing, and curtain wall construction. Others specialize in working with concrete forming systems and finishing interior and exterior walls, partitions, and ceilings. Highly skilled carpenters can usually do many of the same tasks as residential carpenters.

Industrial carpenters typically work in civil and industrial settings where they put up scaffolding and build and set forms for pouring concrete. Some industrial carpenters build tunnel bracing or partitions in underground passageways and mines to control the circulation of air to worksites. Others build concrete forms for tunnels, bridges, dams, power plants, or sewer construction projects.

Automotive service technicians and mechanics, often called service technicians or service techs, inspect, maintain, and repair cars and light trucks.  

Automotive service technicians and mechanics typically do the following:

• Test parts and systems to ensure that they are working properly
• Identify mechanical problems, often by using computerized diagnostic equipment
• Follow checklists to ensure that all critical parts are examined
• Test and lubricate the vehicle's engine and other major components
• Perform basic care and maintenance, including oil changes, tuneups, and tire rotations
• Repair or replace worn parts, such as brake pads and wheel bearings
• Disassemble and reassemble parts
• Use testing equipment to ensure that repairs and maintenance are effective
• Explain to clients their automotive problems and the repairs done on their vehicles

Service technicians work on traditional mechanical components, such as engines, transmissions, belts, and hoses. However, they must also be familiar with a growing number of electronic systems. Braking, transmission, and steering systems, for example, are controlled primarily by computers and electronic components.

Other integrated electronic systems, such as accident-avoidance sensors, are becoming common as well. In addition, a growing number of technicians are required to work on vehicles that run on alternative fuels, such as ethanol and electricity.

Service technicians use many different tools, including computerized diagnostic tools and power tools such as pneumatic wrenches, lathes, welding torches, and jacks and hoists. These tools usually are owned by their employers.

Service technicians also use many common handtools, such as pliers, wrenches, and screwdrivers, which generally are their own. In fact, experienced workers often have thousands of dollars invested in their personal tool collection.

Service technicians sometimes specialize in a particular type of repair that may be subject to specific regulations or procedures. For instance, those focused on air-conditioning system repairs must follow federal and state regulations governing the handling, recycling, and disposal of refrigerants.

In some shops, technicians may specialize. The following are types of service technicians:

Automotive air-conditioning repairers install and repair air conditioners and service parts, such as compressors, condensers, and controls. They are trained in government regulations related to their work.

Brake repairers adjust brakes, replace brake linings and pads, and make other repairs on brake systems. Some technicians specialize in both brake and front-end work. 

Front-end mechanics align and balance wheels and repair steering mechanisms and suspension systems. They frequently use special alignment equipment and wheel-balancing machines.

Transmission technicians and rebuilders work on gear trains, couplings, hydraulic pumps, and other parts of transmissions. Extensive knowledge of computer controls, the ability to diagnose electrical and hydraulic problems, and other specialized skills are needed to work on these complex components.

Tune-up technicians adjust ignition timing and valves and adjust or replace spark plugs and other parts to ensure efficient engine performance. They often use electronic testing equipment to isolate and adjust malfunctions in fuel, ignition, and emissions control systems.

For information about technicians who work on large trucks and buses, see the profile on diesel service technicians and mechanics.

For information about technicians who work on farm equipment, construction vehicles, and rail cars, see the profile on heavy vehicle and mobile equipment service technicians.

For information about technicians who repair and service motorcycles, motorboats, and small all-terrain vehicles, see the profile on small engine mechanics.

Construction managers plan, coordinate, budget, and supervise construction projects from early development to completion.

Construction managers typically do the following:

• Prepare and negotiate cost estimates, budgets, and work timetables
• Select appropriate construction methods and strategies
• Interpret and explain contracts and technical information to workers and other professionals
• Report on work progress and budget matters to clients
• Collaborate with architects, engineers, and other construction and building specialists
• Instruct and supervise construction personnel and activities onsite
• Respond to work delays and other problems and emergencies
• Select, hire, and instruct laborers and subcontractors  
• Comply with legal requirements, building and safety codes, and other regulations

Construction managers, often called general contractors or project managers, coordinate and supervise a wide variety of projects, including the building of all types of residential, commercial, and industrial structures, roads, bridges, powerplants, schools, and hospitals. They oversee specialized contractors and other personnel. Construction managers schedule and coordinate all design and construction processes to ensure a productive and safe work environment. They also make sure jobs are completed on time and on budget with the right amount of tools, equipment, and materials. Many managers also are responsible for obtaining necessary permits and licenses. They are often responsible for multiple projects at a time.

Construction managers work closely with other building specialists, such as architects, engineers, and a variety of trade workers, such as stonemasons, electricians, and carpenters. Projects may require specialists in everything from structural metalworking and painting, to landscaping, building roads, installing carpets, and excavating sites. Depending on the project, construction managers also may interact with lawyers and local government officials. For example, when working on city-owned property or municipal buildings, managers sometimes confer with city council members to ensure that all regulations are met.

For projects too large to be managed by one person, such as office buildings and industrial complexes, a construction manager would only be in charge of one part of the project. Each construction manager would oversee a specific construction phase and choose subcontractors to complete it. Construction managers may need to collaborate and coordinate with other construction managers who are responsible for different aspects of the project.

To maximize efficiency and productivity, construction managers often use specialized cost-estimating and planning software to effectively budget the time and money required to complete specific projects. Many managers also use software to determine the best way to get materials to the building site. For more information, see the profile on cost estimators.