Carpet One Cleaning

Textile Bleaching and Dyeing Machine Operators and Tenders operate or tend machines to bleach, shrink, wash, dye, or finish textiles or synthetic or glass fibers.

Tile and marble setters apply hard tile, marble, and wood tiles to walls, floors, and other surfaces.

Tile and marble setters typically do the following:

• Clean and level the surface to be tiled
• Measure and cut tile and marble
• Arrange tiles according to the design plans
• Prepare and apply mortar or other adhesives
• Install tile and marble in the planned area
• Apply grout with a rubber trowel
• Wipe off excess grout and apply necessary finishes, such as sealants

Tile installers, tilesetters, and marble setters install materials on a variety of surfaces, such as floors, walls, ceilings, countertops, patios, and roof decks. Because tile and marble must be set on smooth, even surfaces, installers often must level the surface to be tiled with a layer of mortar or plywood. If the area to be tiled is unstable, workers must nail a support of metal mesh or tile backer board to create a stable surface.

To cut tiles, workers use power wet saws, tile scribes, or hand-held tile cutters to create even edges. They use trowels of different sizes to spread mortar or a sticky paste, called mastic, evenly on the surface to be tiled. To minimize imperfections and keep rows straight and even, they put spacers between tiles. The spacers keep tiles the same distance from each other until the mortar is dry. After the mortar dries and the tiles are set, they apply grout between tiles using a rubber trowel (called a float).

Marble setters may cut marble to a specified size with a power wet saw. After putting the marble in place, marble setters polish the marble to a high luster, using power or hand sanders.

Upholsterers make, replace, and repair coverings on furniture and in vehicles.

Upholsterers typically do the following:

• Consult with clients to discuss alterations to the furniture and to help customers choose fabric
• Estimate costs for the project, including approximate fabric and labor costs
• Inspect furniture to find needed repairs in the frame, upholstery, and springs
• Remove and replace old and worn padding, filling, and broken springs
• Measure, cut, and sew fabric, and attach it to the furniture frame with tacks, staples and glue

Upholsterers put on covering and cushions to create new furniture and update old furniture and vehicle interiors. Although some upholsterers specialize in either working with old furniture or creating new furniture, most do both.

Upholsterers need to stay current with trends in furniture design and styles. They help choose fabrics that meet their customer's lifestyle, preferences, and needs. For example, upholsterers may help a client who has young children choose a long-lasting and durable fabric for a family room sofa that matches other furniture.

Sometimes they have to choose fabrics that meet building codes--such as being fire resistant--or fabrics that reflect the style of the building. They also may work with interior designers and architects who need furniture for a new building. For more information, see the profiles on interior designers and architects.

Upholsterers may specialize in working on cars and other vehicles. These workers create and replace upholstery for the interiors of cars and other vehicles. They upholster seats, carpet floors, and cover door panels. To replace interiors with another fabric or other material, such as leather, these workers first remove the seats from the vehicle before replacing the upholstery.

Some upholsterers own their business. In these cases, they may do management and administrative tasks, such as managing the finances of their business and taking orders.

Janitors and building cleaners keep many types of buildings clean, orderly, and in good condition.

Janitors and building cleaners typically do the following:

• Gather and empty trash and trash bins
• Clean building floors by sweeping, mopping, or vacuuming them
• Clean bathrooms and stock them with soap, toilet paper, and other supplies
• Keep buildings secure by locking doors
• Clean spills and other hazards using sponges and squeegees
• Wash windows, walls, and glass
• Order cleaning supplies
• Make minor repairs to the building, such as changing light bulbs
• Notify managers when the building needs major repairs

Janitors and building cleaning workers keep office buildings, schools, hospitals, retail stores, hotels, and other places clean, sanitary, and in good condition. Some do only cleaning, while others have a wide range of duties.

In addition to keeping the inside of buildings clean and orderly, some janitors and building cleaners work outdoors, mowing lawns, sweeping walkways, or shoveling snow. Some janitors also monitor the heating and cooling system, ensuring that it functions properly.

Janitors and building cleaners use many tools and equipment. Simple cleaning tools may include mops, brooms, rakes, and shovels. Other tools may include snowblowers and floor buffers.

Some janitors may be responsible for repairing small problems with electricity or plumbing, such as leaky faucets.

Carpet installers lay carpet in homes, offices, restaurants, and many other types of buildings. 

Carpet installers typically do the following:

• Remove old carpet or flooring to prepare surfaces for laying new carpet
• Inspect the condition of the surface to be covered
• Fix any problems that could show through the carpet or cause uneven wear
• Measure the area to be carpeted
• Plan the layout of carpeting to get the best appearance and least wear
• Install a padded cushion underneath the carpet
• Roll out, measure, mark, and cut the carpet
• Fit the carpet so that it lays evenly and snugly
• Tack, glue, or staple carpeting to hold it in place
• Finish the edges so that the carpet looks neat

Carpet installers lay carpet in many types of new and old buildings, including homes, offices, restaurants, and museums. Although installing carpet in newly constructed buildings requires minimal preparation, those who replace existing carpet must first remove old flooring, including any padding, glue, tacks, or staples. In some cases, carpet installers lay carpet over existing tile or hardwood.

Carpet installers work with special tools, including a "knee kicker" to position the carpet and a power stretcher to pull the carpet snugly against walls. When they have to join seams of carpet (for example, in large rooms), they use special heat-activated tape. In commercial installations, they may glue the carpet to the floor or to padding that they have glued to the floor. On steps, they may use staples to hold the carpet in place. They also use carpet knives, carpet shears (scissors), hammers, power sanders, and other tools.