Classic Floor Care

Roofers repair and install the roofs of buildings using a variety of materials, including shingles, asphalt, and metal.

Roofers typically do the following:

• Inspect problem roofs to determine the best way to repair them
• Measure roof to calculate the quantities of materials needed
• Replace damaged or rotting joists or plywood
• Install vapor barriers or layers of insulation
• Install shingles, asphalt, metal, or other materials to make the roof watertight
• Align roofing materials with edges of the roof
• Cut roofing materials to fit angles formed by walls, vents, or intersecting roof surfaces
• Cover exposed nail or screw heads with roofing cement or caulk to prevent leakage

Properly installed roofs keep water from leaking into buildings and damaging the interior, equipment, or furnishings.

There are two basic types of roofs, low-slope and steep-slope:

• Low-slope: About two-thirds of all roofs are low-slope. Most commercial, industrial, and apartment buildings have low-slope roofs. Low-slope roofs rise 4 inches or less per horizontal foot and are installed in layers.
  
  For low-slope roofs, roofers typically use several layers of roofing materials or felt membranes stuck together with hot bitumen (a tar-like substance). They glaze the top layer to make a smooth surface or embed gravel in the hot bitumen to make a rough surface.
  
  An increasing number of low-slope roofs are covered with a single-ply membrane of waterproof rubber or thermoplastic compounds.

• Steep-slope: Most of the remaining roofs are steep-slope. Most single-family houses have steep-slope roofs. Steep-slope roofs rise more than 4 inches per horizontal foot.
  
  For steep-slope roofs, roofers typically use asphalt shingles, which often cost less than other coverings. On steep-slope roofs, some roofers also install tile, solar shingles, fiberglass shingles, metal shingles, or shakes (rough wooden shingles).
  
  To apply shingles, roofers first lay, cut, and tack 3-foot strips of roofing over the entire roof. Then, starting from the bottom edge, they nail overlapping rows of shingles to the roof.

A small but increasing number of buildings now have “green” roofs that incorporate landscape roofing systems. A landscape roofing system typically begins with a single or multiple waterproof layers. After that layer is proven to be leak free, roofers put a root barrier over it, and, finally, layers of soil, in which vegetation is planted. Roofers must ensure that the roof is watertight and can endure the weight and water needs of the plants.

Carpet installers lay carpet in homes, offices, restaurants, and many other types of buildings. 

Carpet installers typically do the following:

• Remove old carpet or flooring to prepare surfaces for laying new carpet
• Inspect the condition of the surface to be covered
• Fix any problems that could show through the carpet or cause uneven wear
• Measure the area to be carpeted
• Plan the layout of carpeting to get the best appearance and least wear
• Install a padded cushion underneath the carpet
• Roll out, measure, mark, and cut the carpet
• Fit the carpet so that it lays evenly and snugly
• Tack, glue, or staple carpeting to hold it in place
• Finish the edges so that the carpet looks neat

Carpet installers lay carpet in many types of new and old buildings, including homes, offices, restaurants, and museums. Although installing carpet in newly constructed buildings requires minimal preparation, those who replace existing carpet must first remove old flooring, including any padding, glue, tacks, or staples. In some cases, carpet installers lay carpet over existing tile or hardwood.

Carpet installers work with special tools, including a "knee kicker" to position the carpet and a power stretcher to pull the carpet snugly against walls. When they have to join seams of carpet (for example, in large rooms), they use special heat-activated tape. In commercial installations, they may glue the carpet to the floor or to padding that they have glued to the floor. On steps, they may use staples to hold the carpet in place. They also use carpet knives, carpet shears (scissors), hammers, power sanders, and other tools.

Laundry and dry-cleaning workers clean clothing, linens, drapes, and other articles, using washing, drying, and dry-cleaning machines. They also may clean leather, suede, furs, and rugs.

Laundry and dry-cleaning workers typically do the following:

• Receive items from customers and mark them with codes or names
• Inspect articles for stains and fabrics that require special care
• Sort articles to be cleaned by fabric type, color, and cleaning technique
• Load clothing into laundry and dry-cleaning machines
• Add detergent, bleach, and other chemicals to laundry and dry-cleaning machines
• Remove, sort, and hang clothing and other articles after they are removed from the machines
• Clean and maintain laundry and dry-cleaning machines

Laundry and dry-cleaning workers ensure proper cleaning of clothing, linens, and other articles. They adjust machine settings for a given fabric or article, as determined by the cleaning instructions on each item of clothing.

When necessary, workers treat spots and stains on articles before washing or dry-cleaning. They monitor machines during the cleaning process and ensure that items are not lost or placed with items of another customer.

Sometimes, laundry and dry-cleaning workers interact with customers. They take the receipts, find the customer's clothing, take payment, make change, and do the cash register work that retail sales people do.

Some dry-cleaners offer alteration services. Often, sewers and tailors do these tasks, but some laundry and dry-cleaning workers do them as well. For more information, see the profile on sewers and tailors.

Maids and housekeeping cleaners perform general cleaning tasks, including making beds and vacuuming halls, in private homes and commercial establishments.

Maids and housekeeping cleaners typically do the following:

• Clean rooms, hallways, and other living or work areas
• Change sheets and towels; make beds; wash, fold, and iron clothes
• Empty wastebaskets and take trash to disposal areas
• Replenish supplies, such as soap and toilet paper
• Dust and polish furniture and equipment
• Sweep, wax, or polish floors using brooms, mops, or other floor-cleaning equipment
• Vacuum rugs, carpets, and upholstered furniture
• Clean or polish windows, walls, and woodwork
• Lift and move lightweight objects and equipment

Maids and housekeeping cleaners do light cleaning tasks in homes and commercial establishments, such as hotels, restaurants, hospitals, and nursing homes.

In addition to keeping these places clean and neat, maids who work in private homes also may prepare meals, polish silver, and clean ovens, refrigerators, and sometimes windows. Some also shop for groceries, pick up and drop off dry cleaning, and do other errands.

Those who work in hotels, hospitals, and other commercial establishments are responsible for cleaning and maintaining the premises. They may also share other duties. For example, housekeeping cleaners in hotels may deliver ironing boards, cribs, and rollaway beds to guests' rooms. In hospitals, workers may have to wash bed frames and disinfect and sanitize equipment with germicides.

Painters apply paint, stain, and coatings to walls, buildings, bridges, and other structures.

Painters typically do the following:

• Cover floors and furniture with drop-cloths and tarps to protect surfaces
• Remove fixtures such as pictures, door knobs, or electric switch covers
• Put up scaffolding and set up ladders
• Fill holes and cracks with caulk, putty, plaster, or other compounds
• Prepare surfaces by scraping, wire brushing, or sanding to a smooth finish
• Calculate the area to be painted and the amount of paint needed
• Apply primers or sealers so the paint will adhere
• Choose and mix paints and stains to reach desired color and appearance
• Apply paint or other finishes using hand brushes, rollers, or sprayers

Applying paint to interior walls makes surfaces attractive and vibrant. In addition, paints and other sealers protect exterior surfaces from erosion caused by exposure to the weather.

Because there are several ways to apply paint, workers must be able to choose the proper tool for each job, such as the correct roller, power sprayer, and the right size brush. Choosing the right tool typically depends on the surface to be covered and the characteristics of the finish.

A few painters--mainly industrial--must use special safety equipment. For example, painting in confined spaces such as the inside of a large storage tank, requires workers to wear self-contained suits to avoid inhaling toxic fumes. When painting bridges, tall buildings, or oil rigs, painters may work from scaffolding, bosun's chairs, and harnesses to reach work areas.

The following are examples of types of painters:  

Construction painters apply paints, stains, and coatings to interior and exterior walls, new buildings, and other structural surfaces.

Maintenance painters remove old finishes and apply paints, stains, and coatings later in a structure's life. Some painters specialize in painting or coating industrial structures, such as bridges and oil rigs, to prevent corrosion.

Artisan painters specialize in creating distinct finishes by using one of many decorative techniques. One technique is adding glaze for added depth and texture. Other common techniques may include sponging, distressing, rag-rolling, color blocking, and faux finishes. 

Painting and coating workers apply materials to manufactured products, such as furniture, toys and pottery, as well as transportation equipment including trucks, buses, boats, and airplanes. For more information about these painters, see the profile on painting and coating workers.