Flood Control

Drywall and ceiling tile installers hang wallboards to walls and ceilings inside buildings. Tapers prepare the wallboards for painting, using tape and other materials. Many workers do both installing and taping.

Drywall installers typically do the following:

• Review design plans to minimize the number of cuts and waste of wallboard
• Measure the location of electrical outlets, plumbing, windows, and vents
• Cut drywall to the right size, using utility knives and power saws
• Fasten drywall panels to interior wall studs, using nails or screws
• Trim and smooth rough edges so boards join evenly

Ceiling tile installers typically do the following:

• Measure according to blueprints or drawings
• Nail or screw supports
• Put tiles or sheets of shock-absorbing materials on ceilings  
• Keep the tile in place with cement adhesive, nails, or screws

Tapers typically do the following:

• Prepare wall surface (wallboard) by patching nail holes
• Apply tape and use sealing compound to cover joints between wallboards
• Apply additional coats of sealing compound to create an even surface
• Sand all joints and holes to a smooth, seamless finish

Installers are also called framers or hangers. Tapers are also called finishers. Ceiling tile installers are sometimes called acoustical carpenters because they work with tiles that block sound.

Once wallboards are hung, workers use increasingly wider trowels to spread multiple coats of spackle over cracks, indentations, and any remaining imperfections. Some workers may use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

To work on ceilings, drywall and ceiling tile installers and tapers may use mechanical lifts or stand on stilts, ladders, or scaffolds.

Plumbers, pipefitters, and steamfitters install and repair pipes that carry water, steam, air, or other liquids or gases to and in businesses, homes, and factories.

Plumbers, pipefitters, and steamfitters typically do the following:

• Install pipes and fixtures
• Study blueprints and follow state and local building codes
• Determine the amount of material and type of equipment needed
• Inspect and test installed pipe systems and pipelines
• Troubleshoot and repair systems that are not working
• Replace worn parts

Although plumbers, pipefitters, and steamfitters are three distinct specialties, their duties are often similar. For example, they all install pipes and fittings that carry water, steam, air, or other liquids or gases. They connect pipes, determine the necessary materials for a job, and perform pressure tests to ensure a pipe system is airtight and watertight.

Plumbers, pipefitters, and steamfitters install, maintain, and repair many different types of pipe systems. Some of these systems carry water, dispose of waste, supply gas to ovens, or heat and cool buildings. Other systems, such as those in power plants, carry the steam that powers huge turbines. Pipes also are used in manufacturing plants to move acids, gases, and waste byproducts through the production process.

Master plumbers on construction jobs may be involved with developing blueprints that show where all the pipes and fixtures will go. Their input helps ensure that a structure's plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires.

Plumbers and fitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power-plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.

Plumbers and fitters sometimes cut holes in walls, ceilings, and floors. With some pipe systems, workers may hang steel supports from ceiling joists to hold the pipe in place. Because pipes are seldom manufactured to the exact size or length, plumbers and fitters measure and then cut and bend lengths of pipe as needed. Their tools include saws, pipe cutters, and pipe-bending machines.

They then connect the pipes, using methods that vary by type of pipe. For example, copper pipe is joined with solder, but steel pipe is often screwed together.

In addition to installation and repair work, journey- and master-level plumbers, pipefitters, and steamfitters often direct apprentices and helpers.

Following are examples of occupational specialties:

Plumbers install and repair water, drainage, and gas pipes in homes, businesses, and factories. They install and repair large water lines, such as those that supply water to buildings, and smaller ones, including ones that supply water to refrigerators. Plumbers also install plumbing fixtures--bathtubs, showers, sinks, and toilets--and appliances such as dishwashers, garbage disposals, and water heaters. They also fix plumbing problems. For example, when a pipe is clogged or leaking, plumbers remove the clog or replace the pipe. Some plumbers maintain septic systems, the large, underground holding tanks that collect waste from houses not connected to a city or county's sewer system.

Pipefitters install and maintain pipes that carry chemicals, acids, and gases. These pipes are mostly in manufacturing, commercial, and industrial settings. They often install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize:

• Gasfitters install pipes that provide clean oxygen to patients in hospitals.
• Sprinklerfitters install and repair fire sprinkler systems in businesses, factories, and residential buildings.
• Steamfitters installpipe systems that move steam under high pressure. Most steamfitters work at campus and natural gas power plants where heat and electricity is generated, but others work in factories that use high-temperature steam pipes.

Environmental scientists and specialists use their knowledge of the natural sciences to protect the environment. They identify problems and find solutions that minimize hazards to the health of the environment and the population.

Environmental scientists and specialists typically do the following:

• Determine data collection methods for research projects, investigations, and surveys
• Collect environmental data, such as samples of air, soil, water, food, and other materials, for scientific analysis
• Analyze samples, surveys, and other information to identify and assess threats to the environment
• Develop plans to prevent, control, or fix environmental problems, such as pollution and harm to land or water
• Develop plans to restore polluted or contaminated land or water
• Provide information and guidance to government officials, businesses, and the general public on possible environmental hazards and health risks
• Prepare technical reports and presentations that explain their research and findings

Environmental scientists and specialists analyze environmental problems and develop solutions. For example, many environmental scientists and specialists work to reclaim lands and waters that have been contaminated by pollution. Others assess the risks new construction projects pose to the environment and make recommendations to governments and businesses on how to minimize the environmental impact of these projects. They also identify ways that human behavior can be changed to avoid problems such as the depletion of the ozone layer.

The federal government and many state and local governments have regulations to ensure that there is clean air to breathe, safe water to drink, and no hazardous materials in the soil. The regulations also place limits on development, particularly near sensitive parts of the ecosystem, such as wetlands. Many environmental scientists and specialists work for the government to ensure that these regulations are followed. Other environmental scientists work for consulting firms that help companies comply with regulations and policies.

Some environmental scientists and specialists focus on environmental regulations that are designed to protect people's health, while others focus on regulations designed to minimize society's impact on the ecosystem. The following are examples of types of specialists:

Environmental health specialists study how environmental factors impact human health. They investigate potential health risks, such as unsafe drinking water, disease, and food safety. They also educate the public about potential health risks present in the environment.

Environmental protection specialists monitor the effect human activity has on the environment. They investigate sources of pollution and develop prevention, control, and remediation plans.

Other environmental scientists do work and receive training that is similar to that of other physical or life scientists, but they focus on environmental issues. Environmental chemists are an example.

Environmental chemists study the effects that various chemicals have on ecosystems. For example, they look at how acids affect plants, animals, and people. Some areas in which they work include waste management and the remediation of contaminated soils, water, and air.

Many people with backgrounds in environmental science become professors and teachers. For more information, see the profile on postsecondary teachers.

Heating, air conditioning, and refrigeration mechanics and installers--often referred to as HVACR technicians--work on heating, ventilation, cooling, and refrigeration systems that control the air quality in many types of buildings.

Heating, air conditioning, and refrigeration mechanics and installers typically do the following:

• Travel to worksites
• Follow blueprints or other design specifications to install or repair HVACR systems
• Connect systems to fuel and water supply lines, air ducts, and other components
• Install electrical wiring and controls and test for proper operation
• Inspect and maintain customers' HVACR systems
• Test individual components to determine necessary repairs
• Repair or replace worn or defective parts

Heating and air conditioning systems control the temperature, humidity, and overall air quality in homes, businesses, and other buildings. By providing a climate controlled environment, refrigeration systems make it possible to store and transport food, medicine, and other perishable items.

Although trained to do all three, HVACR technicians sometimes work strictly with heating, air conditioning, or refrigeration systems. They also may specialize in certain types of HVACR equipment, such as water-based heating systems, solar panels, or commercial refrigeration.

Depending on the task, HVACR technicians use many different tools. For example, they often use screwdrivers, wrenches, pipe cutters and other basic handtools when installing systems. To test or install complex system components, technicians may use more sophisticated tools, such as carbon monoxide testers, voltmeters, combustion analyzers, and acetylene torches.

When working on air conditioning and refrigeration systems, technicians must follow government regulations regarding the conservation, recovery, and recycling of refrigerants. This often entails proper handling and disposal of fluids.  

Some HVACR technicians sell service contracts to their clients, providing regular maintenance of heating and cooling systems.

Other craft workers sometimes help install or repair cooling and heating systems. For example, on a large air conditioning installation job, especially one in which workers are covered by union contracts, ductwork might be done by sheet metal workers and duct installers, or electrical work by electricians. In addition, home appliance repairers usually service window air conditioners and household refrigerators. For more information on these occupations, see the profiles on sheet metal workers, electricians, or home appliance repairers.

Construction laborers and helpers do many basic tasks that require physical labor on construction sites.

Construction laborers and helpers typically do the following:

• Clean and prepare construction sites by removing debris and possible hazards
• Load or unload building materials to be used in construction
• Build or take apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
• Dig trenches, backfill holes, or compact earth to prepare for construction
• Operate or tend equipment and machines used in construction, such as concrete mixers
• Help other craftworkers with their duties
• Follow construction plans and instructions from the people they are working for

Construction laborers and helpers work on almost all construction sites, doing a wide range of tasks from the very easy to the extremely difficult and hazardous. Although many of the tasks they do require some training and experience, most jobs usually require little skill and can be learned quickly. 

The following are occupational specialties:

Construction laborers do a variety of construction-related activities during all phases of construction. Although most laborers are generalists--such as those who install barricades, cones, and markers to control traffic patterns--many others specialize. For example, those who operate the machines and equipment that lay concrete or asphalt on roads are more likely to specialize in those areas.

Most construction laborers work in the following areas:

• Building homes and businesses
• Tearing down buildings
• Removing hazardous materials
• Building highways and roads
• Digging tunnels and mine shafts

Construction laborers use a variety of tools and equipment. Some tools are simple, such as brooms and shovels; other equipment is more sophisticated, such as pavement breakers, jackhammers, earth tampers, and surveying equipment.

With special training, laborers may help transport and use explosives or run hydraulic boring machines to dig out tunnels. They may learn to use laser beam equipment to place pipes and use computers to control robotic pipe cutters. They may become certified to remove asbestos, lead, or chemicals.

Helpers assist construction craftworkers, such as electricians and carpenters, with a variety of basic tasks. They may carry tools and materials or help set up equipment. For example, many helpers work with cement masons to move and set forms. Many other helpers assist with taking apart equipment, cleaning up sites, and disposing of waste, as well as helping with any other needs of craftworkers.

Many construction trades have helpers who assist craftworkers. The following are examples of trades that have associated helpers:

• Brickmasons, blockmasons, stonemasons, and tile and marble setters
• Carpenters
• Electricians
• Painters, paperhangers, plasterers, and stucco masons
• Pipelayers, plumbers, pipefitters, and steamfitters
• Roofers