Sexton Pest Control, Inc.

Pest control workers control, manage, or remove unwanted creatures, such as roaches, rats, ants, termites, and bedbugs, that infest buildings and surrounding areas. 

Pest control workers typically do the following:

• Inspect buildings and premises for signs of pests or infestation
• Determine the type of treatment needed to eliminate pests
• Measure the dimensions of the area needing treatment
• Estimate the cost of their services
• Set bait and traps to remove or kill pests
• Spray or dust pesticides into rooms
• Design and carry out pest management plans
• Drive trucks equipped with power spraying equipment
• Create barriers to prevent pests from entering a building

Unwanted pests that infest buildings or surrounding areas can pose serious risks to the health and safety of occupants. Pest control workers control, manage, or remove these creatures from homes, apartments, offices, and other structures to protect people and to maintain buildings' structural integrity.

To design and carry out integrated pest management (IPM) plans, pest control workers must know the identity and biology of a wide range of pests. They must also know the best ways to control or remove the pests.

Pest control workers' position titles and job duties often vary by state. The following are types of pest control workers:

Pest control technicians identify potential pest problems, conduct inspections, and design control strategies. They work directly with customers and, as entry-level workers, use only a limited range of pesticides.

Applicators use a wide range of pesticides and may specialize in a particular area of pest control:

• Termite control technicians use chemicals and modify structures to eliminate termites and prevent future infestations. Some also repair structural damage caused by termites and build barriers to separate pests from their source of food.
• Fumigators use poisonous gases, called fumigants, to treat serious infestations. Fumigators seal infested buildings before using hoses to fill the structure with fumigants. Warning signs are posted to keep people from going into fumigated buildings, and fumigators monitor buildings closely to detect and stop leaks.

Heavy vehicle and mobile equipment service technicians inspect, maintain, and repair vehicles and machinery used in construction, farming, rail transportation, and other industries.

Heavy vehicle and mobile equipment service technicians typically do the following:

• Read and understand operating manuals, blueprints, and drawings
• Perform scheduled maintenance, such as cleaning and lubricating parts
• Diagnose and identify malfunctions, using computerized tools and equipment
• Inspect, repair, and replace defective or worn parts, such as bearings, pistons, and gears
• Overhaul and test major components, such as engines, hydraulics, and electrical systems
• Disassemble and reassemble heavy equipment and components
• Travel to worksites to repair large equipment, such as cranes

Heavy vehicles and mobile equipment are critical to many industrial activities, including construction and railroad transportation. Various types of equipment, such as farm machinery, cranes, and bulldozers, are used to move materials, till land, lift beams, and dig earth to pave the way for development and construction.

Heavy vehicle and mobile equipment service technicians repair and maintain engines, hydraulic systems, transmissions, and electrical systems of agricultural, industrial, construction, and rail equipment. They ensure the performance and safety of fuel lines, brakes, transmissions, and other systems.

With many types of equipment and mechanical and electrical systems, service technicians use diagnostic computers to identify problems and make adjustments or repairs. Although the use of computerized testing equipment, such as tachometers and dynamometers, is common, technicians also use many different power and machine tools, including pneumatic wrenches, lathes, and welding equipment.

Service technicians also use many different handtools, such as screwdrivers, pliers, and wrenches, to work on small parts and in hard-to-reach areas. They generally purchase these tools over the course of their careers, often investing thousands of dollars in their collections.

After locating malfunctions, service technicians repair, replace, and recalibrate components such as hydraulic pumps or spark plugs. This may involve disassembling and reassembling major equipment or making adjustments through an onboard computer program.

The following are types of heavy vehicle and mobile equipment service technicians:

Farm equipment mechanics service and repair farm equipment, such as tractors and harvesters. They also work on smaller consumer-grade lawn and garden tractors. Most mechanics work for dealer repair shops, where farmers increasingly send their equipment for maintenance.   

Mobile heavy equipment mechanics repair and maintain construction and surface mining equipment, such as bulldozers, cranes, graders, and excavators. Many work for equipment wholesale and distribution shops and large construction and mining companies. Those working for the federal government may work on tanks and other military equipment.

Rail car repairers specialize in servicing railroad locomotives, subway cars, and other rolling stock. They usually work for railroad, public and private transit companies, and rail car manufacturers.

For information about technicians and mechanics who work primarily on automobiles, see the profile on automotive service technicians and mechanics.

For information about technicians who work primarily on large trucks and buses, see the profile on diesel service technicians and mechanics.

For information about technicians and mechanics who primarily work on motorboats, motorcycles and small all-terrain vehicles, see the profile on small engine mechanics.

Grounds maintenance workers provide a pleasant outdoor environment by ensuring that the grounds of houses, businesses, and parks are attractive, orderly, and healthy.

Grounds maintenance workers typically do the following:

• Mow, edge, and fertilize lawns
• Weed and mulch landscapes
• Trim hedges, shrubs, and small trees
• Remove dead, damaged, or unwanted trees
• Plant flowers, trees, and shrubs
• Water lawns, landscapes, and gardens

Grounds maintenance workers do a variety of tasks to achieve a pleasant and functional outdoor environment. They also care for indoor gardens and plantings in commercial and public facilities, such as malls, hotels, and botanical gardens.

The following are types of grounds maintenance workers:

Landscaping workers create new outdoor spaces or upgrade existing ones by planting trees, flowers, and shrubs. They also trim, fertilize, mulch, and water plants. Some grade and install lawns or construct hardscapes such as walkways, patios, and decks. Others help install lighting or sprinkler systems. Landscaping workers work in a variety of residential and commercial settings, such as homes, apartment buildings, office buildings, shopping malls, and hotels and motels.

Groundskeeping workers, also called groundskeepers, maintain existing grounds. They care for plants and trees, rake and mulch leaves, and clear snow from walkways. They work on athletic fields, golf courses, cemeteries, university campuses, and parks, as well as in many of the same settings as landscaping workers. They also see to the proper upkeep and repair of sidewalks, parking lots, groundskeeping equipment, fountains, fences, planters, and benches.

Groundskeeping workers who care for athletic fields keep natural and artificial turf in top condition, mark out boundaries, and paint turf with team logos and names before events. They mow, water, fertilize, and aerate the fields regularly. They must make sure that the underlying soil on fields with natural turf has the required composition to allow proper drainage and to support the grasses used on the field. In sports venues, they vacuum and disinfect synthetic turf after its use to prevent the growth of harmful bacteria, and they remove the turf and replace the cushioning pad periodically.

Groundskeepers in parks and recreation facilities care for lawns, trees, and shrubs; maintain playgrounds; clean buildings; and keep parking lots, picnic areas, and other public spaces free of litter. They also may erect and dismantle snow fences, and maintain swimming pools. These workers inspect buildings and equipment, make needed repairs, and keep everything freshly painted.

Some groundskeepers specialize in caring for cemeteries and memorial gardens. They dig graves to specified depths, generally using a backhoe. They mow grass regularly, apply fertilizers and other chemicals, prune shrubs and trees, plant flowers, and remove debris from graves.

Greenskeepers maintain golf courses. Their work is similar to that of groundskeepers, but they also periodically relocate holes on putting greens and maintain benches and tee markers along the course. In addition, greenskeepers keep canopies, benches, and tee markers repaired and freshly painted.

Pesticide handlers, sprayers, and applicators apply herbicides, fungicides, or insecticides on plants or the soil to prevent or control weeds, insects, and diseases. Those who work for chemical lawn or tree service firms are more specialized, inspecting lawns for problems and applying fertilizers, pesticides, and other chemicals to stimulate growth and prevent or control weeds, diseases, or insect infestations.

Tree trimmers and pruners, also called arborists, cut away dead or excess branches from trees or shrubs to clear utility lines, roads, and sidewalks. Although many workers strive to improve the appearance and health of trees and plants, some specialize in diagnosing and treating tree diseases. Others specialize in pruning, trimming, and shaping ornamental trees and shrubs. Tree trimmers and pruners use chainsaws, chippers, and stump grinders while on the job. When trimming near power lines, they usually work on truck-mounted lifts and use power pruners.

Boilermakers assemble, install, and repair boilers, closed vats, and other large vessels or containers that hold liquids and gases.

Boilermakers typically do the following:

• Use blueprints to determine locations, positions, or dimensions of parts
• Install small premade boilers into buildings and manufacturing facilities
• Lay out prefabricated parts of larger boilers before assembling them
• Assemble boiler tanks, often using robotic or automatic welders
• Test and inspect boiler systems for leaks or defects
• Clean vats using scrapers, wire brushes, and cleaning solvents
• Replace or repair broken valves, pipes, or joints, using hand and power tools, gas torches, and welding equipment

Boilers, tanks, and vats are used in many buildings, factories, and ships. Boilers heat water or other fluids under extreme pressure to generate electric power and to provide heat. Large tanks and vats are used to store and process chemicals, oil, beer, and hundreds of other products.

Boilers are made out of steel, iron, copper, or stainless steel. Manufacturers are increasingly automating the production of boilers to improve the quality of these vessels. However, boilermakers still use many tools in making or repairing boilers. For example, they use hand and power tools or flame cutting torches to cut pieces for a boiler. To bend the pieces into shape and accurately line them up, boilermakers use plumb bobs, levels, wedges, and turnbuckles.

If the plate sections are very large, large cranes lift the parts into place. Once they have the parts lined up, they use metalworking machinery and other tools to remove irregular edges so the parts fit together properly. They join the parts by bolting, welding, or riveting them together.

In addition to installing and maintaining boilers and other vessels, boilermakers help erect and repair air pollution equipment, blast furnaces, water treatment plants, storage and process tanks, and smokestacks. Boilermakers also install refractory brick and other heat-resistant materials in fireboxes or pressure vessels. Some install and maintain the huge pipes used in dams to send water to and from hydroelectric power generation turbines.

Because boilers last a long time--sometimes 50 years or more--boilermakers must regularly maintain them and upgrade parts. They frequently inspect fittings, feed pumps, safety and check valves, water and pressure gauges, and boiler controls.

Plumbers, pipefitters, and steamfitters install and repair pipes that carry water, steam, air, or other liquids or gases to and in businesses, homes, and factories.

Plumbers, pipefitters, and steamfitters typically do the following:

• Install pipes and fixtures
• Study blueprints and follow state and local building codes
• Determine the amount of material and type of equipment needed
• Inspect and test installed pipe systems and pipelines
• Troubleshoot and repair systems that are not working
• Replace worn parts

Although plumbers, pipefitters, and steamfitters are three distinct specialties, their duties are often similar. For example, they all install pipes and fittings that carry water, steam, air, or other liquids or gases. They connect pipes, determine the necessary materials for a job, and perform pressure tests to ensure a pipe system is airtight and watertight.

Plumbers, pipefitters, and steamfitters install, maintain, and repair many different types of pipe systems. Some of these systems carry water, dispose of waste, supply gas to ovens, or heat and cool buildings. Other systems, such as those in power plants, carry the steam that powers huge turbines. Pipes also are used in manufacturing plants to move acids, gases, and waste byproducts through the production process.

Master plumbers on construction jobs may be involved with developing blueprints that show where all the pipes and fixtures will go. Their input helps ensure that a structure's plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires.

Plumbers and fitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power-plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.

Plumbers and fitters sometimes cut holes in walls, ceilings, and floors. With some pipe systems, workers may hang steel supports from ceiling joists to hold the pipe in place. Because pipes are seldom manufactured to the exact size or length, plumbers and fitters measure and then cut and bend lengths of pipe as needed. Their tools include saws, pipe cutters, and pipe-bending machines.

They then connect the pipes, using methods that vary by type of pipe. For example, copper pipe is joined with solder, but steel pipe is often screwed together.

In addition to installation and repair work, journey- and master-level plumbers, pipefitters, and steamfitters often direct apprentices and helpers.

Following are examples of occupational specialties:

Plumbers install and repair water, drainage, and gas pipes in homes, businesses, and factories. They install and repair large water lines, such as those that supply water to buildings, and smaller ones, including ones that supply water to refrigerators. Plumbers also install plumbing fixtures--bathtubs, showers, sinks, and toilets--and appliances such as dishwashers, garbage disposals, and water heaters. They also fix plumbing problems. For example, when a pipe is clogged or leaking, plumbers remove the clog or replace the pipe. Some plumbers maintain septic systems, the large, underground holding tanks that collect waste from houses not connected to a city or county's sewer system.

Pipefitters install and maintain pipes that carry chemicals, acids, and gases. These pipes are mostly in manufacturing, commercial, and industrial settings. They often install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize:

• Gasfitters install pipes that provide clean oxygen to patients in hospitals.
• Sprinklerfitters install and repair fire sprinkler systems in businesses, factories, and residential buildings.
• Steamfitters installpipe systems that move steam under high pressure. Most steamfitters work at campus and natural gas power plants where heat and electricity is generated, but others work in factories that use high-temperature steam pipes.