A & E Restoration & Cleaning

Hydrologists study water and the water cycle. They study the movement, distribution, and other properties of water, and they analyze how these influence the surrounding environment. They use their expertise to solve problems concerning water quality and availability, for example.

Hydrologists typically do the following:

• Measure the properties of bodies of water, such as volume and stream flow
• Collect water and soil samples to test for certain properties, such as levels of pollution
• Apply research findings to help minimize the environmental impacts of pollution, erosion, and other problems
• Research ways to improve water conservation and preservation
• Use computer models to forecast future water supplies, the spread of pollution, and other events
• Evaluate the feasibility of water-related projects, such as hydroelectric power plants, irrigation systems, and waste treatment facilities
• Prepare written reports and presentations of their findings

Hydrologists use remote sensing equipment to collect data. They or technicians whom they supervise usually install and maintain this equipment.

They also use sophisticated computer programs to analyze and model data. They use sophisticated laboratory equipment to analyze chemical samples collected in the field.

Hydrologists work closely with engineers, scientists, and public officials to study and manage the water supply. For example, they work with policy makers to develop water conservation plans and with biologists to monitor marine wildlife.

Most hydrologists specialize in a specific water source or a certain aspect of the water cycle, such as the evaporation of water from lakes and streams. Some of the most common specialties are:

Groundwater hydrologists study the water below the Earth's surface. They decide the best locations for wells and the amount of water that should be pumped. They are often consulted about the best places to build waste disposal sites to ensure that the waste does not contaminate the groundwater.

Hydrometeorologists study the relationship between surface waters and water in the atmosphere. For example, to predict and prepare for droughts, they study how much rain or snow a particular area gets and how that evaporates.

Surface water hydrologists study water from above ground sources such as streams, lakes, and snow packs. They may predict future water levels and usage to help reservoir managers decide when to release or store water. They also produce flood forecasts and help develop flood management plans.

Some people with a hydrology background become professors or teachers. For more information, see the profile on postsecondary teachers.

Painters apply paint, stain, and coatings to walls, buildings, bridges, and other structures.

Painters typically do the following:

• Cover floors and furniture with drop-cloths and tarps to protect surfaces
• Remove fixtures such as pictures, door knobs, or electric switch covers
• Put up scaffolding and set up ladders
• Fill holes and cracks with caulk, putty, plaster, or other compounds
• Prepare surfaces by scraping, wire brushing, or sanding to a smooth finish
• Calculate the area to be painted and the amount of paint needed
• Apply primers or sealers so the paint will adhere
• Choose and mix paints and stains to reach desired color and appearance
• Apply paint or other finishes using hand brushes, rollers, or sprayers

Applying paint to interior walls makes surfaces attractive and vibrant. In addition, paints and other sealers protect exterior surfaces from erosion caused by exposure to the weather.

Because there are several ways to apply paint, workers must be able to choose the proper tool for each job, such as the correct roller, power sprayer, and the right size brush. Choosing the right tool typically depends on the surface to be covered and the characteristics of the finish.

A few painters--mainly industrial--must use special safety equipment. For example, painting in confined spaces such as the inside of a large storage tank, requires workers to wear self-contained suits to avoid inhaling toxic fumes. When painting bridges, tall buildings, or oil rigs, painters may work from scaffolding, bosun's chairs, and harnesses to reach work areas.

The following are examples of types of painters:  

Construction painters apply paints, stains, and coatings to interior and exterior walls, new buildings, and other structural surfaces.

Maintenance painters remove old finishes and apply paints, stains, and coatings later in a structure's life. Some painters specialize in painting or coating industrial structures, such as bridges and oil rigs, to prevent corrosion.

Artisan painters specialize in creating distinct finishes by using one of many decorative techniques. One technique is adding glaze for added depth and texture. Other common techniques may include sponging, distressing, rag-rolling, color blocking, and faux finishes. 

Painting and coating workers apply materials to manufactured products, such as furniture, toys and pottery, as well as transportation equipment including trucks, buses, boats, and airplanes. For more information about these painters, see the profile on painting and coating workers.

Construction equipment operators drive, maneuver, or control the heavy machinery used to construct roads, bridges, buildings, and other structures.

Construction equipment operators typically do the following:

• Check to make sure that equipment functions properly
• Clean, maintain, and make basic repairs to equipment
• Report malfunctions to supervisors
• Move levers, push pedals, or turn valves to activate power equipment
• Drive and maneuver equipment
• Coordinate machine actions with crew members in response to hand or audio signals
• Ensure that safety standards are met

Construction equipment operators use machinery to move construction materials, earth, and other heavy materials at construction sites and mines. They operate equipment that clears and grades land to prepare it for construction of roads, bridges, and buildings, as well as airport runways, power generation facilities, dams, levees, and other structures.

The following are types of construction equipment operators:

Operating engineers and other construction equipment operators work with one or several types of power construction equipment. They may operate excavation and loading machines equipped with scoops, shovels, or buckets that dig sand, gravel, earth, or similar materials. In addition to operating the familiar bulldozer, they operate trench excavators, road graders, and similar equipment. Sometimes, they may drive and control industrial trucks or tractors equipped with forklifts or booms for lifting materials. They also may operate and maintain air compressors, pumps, and other power equipment at construction sites.

Paving and surfacing equipment operators control the machines that spread and level asphalt or spread and smooth concrete for roadways or other structures. Paving and surfacing equipment operators may specialize further:

• Asphalt spreader operators turn valves to regulate the temperature of asphalt and the flow of asphalt onto the roadbed. They must ensure that the machine distributes the paving material evenly, and they also must ensure that there is a constant flow of asphalt into the hopper.
• Concrete paving machine operators control levers and turn handwheels to move attachments that spread, vibrate, and level wet concrete. They must watch the surface of the concrete carefully to identify low spots into which workers must add concrete.
• Tamping equipment operators use machines that compact earth and other fill materials for roadbeds or other construction sites. They also may operate machines with interchangeable hammers to cut or break up old pavement and drive guardrail posts into the ground.

Piledriver operators use large machines mounted on skids, barges, or cranes to hammer piles into the ground. Piles are long, heavy beams of wood or steel driven into the ground to support retaining walls, bridges, piers, or building foundations. Some piledriver operators work on offshore oil rigs.

Some workers operate cranes to move construction materials. For more information on these workers, see the profile on material moving machine operators.

Roofers repair and install the roofs of buildings using a variety of materials, including shingles, asphalt, and metal.

Roofers typically do the following:

• Inspect problem roofs to determine the best way to repair them
• Measure roof to calculate the quantities of materials needed
• Replace damaged or rotting joists or plywood
• Install vapor barriers or layers of insulation
• Install shingles, asphalt, metal, or other materials to make the roof watertight
• Align roofing materials with edges of the roof
• Cut roofing materials to fit angles formed by walls, vents, or intersecting roof surfaces
• Cover exposed nail or screw heads with roofing cement or caulk to prevent leakage

Properly installed roofs keep water from leaking into buildings and damaging the interior, equipment, or furnishings.

There are two basic types of roofs, low-slope and steep-slope:

• Low-slope: About two-thirds of all roofs are low-slope. Most commercial, industrial, and apartment buildings have low-slope roofs. Low-slope roofs rise 4 inches or less per horizontal foot and are installed in layers.
  
  For low-slope roofs, roofers typically use several layers of roofing materials or felt membranes stuck together with hot bitumen (a tar-like substance). They glaze the top layer to make a smooth surface or embed gravel in the hot bitumen to make a rough surface.
  
  An increasing number of low-slope roofs are covered with a single-ply membrane of waterproof rubber or thermoplastic compounds.

• Steep-slope: Most of the remaining roofs are steep-slope. Most single-family houses have steep-slope roofs. Steep-slope roofs rise more than 4 inches per horizontal foot.
  
  For steep-slope roofs, roofers typically use asphalt shingles, which often cost less than other coverings. On steep-slope roofs, some roofers also install tile, solar shingles, fiberglass shingles, metal shingles, or shakes (rough wooden shingles).
  
  To apply shingles, roofers first lay, cut, and tack 3-foot strips of roofing over the entire roof. Then, starting from the bottom edge, they nail overlapping rows of shingles to the roof.

A small but increasing number of buildings now have “green” roofs that incorporate landscape roofing systems. A landscape roofing system typically begins with a single or multiple waterproof layers. After that layer is proven to be leak free, roofers put a root barrier over it, and, finally, layers of soil, in which vegetation is planted. Roofers must ensure that the roof is watertight and can endure the weight and water needs of the plants.

Carpenters construct and repair building frameworks and structures--such as stairways, doorframes, partitions, and rafters--made from wood and other materials. They also may install kitchen cabinets, siding, and drywall.

Carpenters typically do the following:

• Follow blueprints and building plans to meet the needs of clients
• Install structures and fixtures, such as windows and molding
• Measure, cut, or shape wood, plastic, fiberglass, drywall, and other materials
• Construct building frameworks, including wall studs, floor joists, and doorframes
• Help put up, level, and install building framework with the aid of large pulleys and cranes
• Inspect and replace damaged framework or other structures and fixtures
• Instruct and direct laborers and other construction trade helpers

Carpenters are one of the most versatile construction occupations, with workers usually doing a variety of tasks. For example, some carpenters insulate office buildings; others install drywall or kitchen cabinets in homes. Those who help construct large buildings or bridges often make the wooden concrete forms for cement footings or pillars. Some carpenters build braces and scaffolding for buildings.

Carpenters use many different hand and power tools to cut and shape wood, plastic, fiberglass, or drywall. They commonly use handtools, including squares, levels, and chisels, as well as many power tools, such as sanders, circular saws, and nail guns. Carpenters put materials together with nails, screws, staples, and adhesives, and do a final check of their work to ensure accuracy. They use a tape measure on every project because proper measuring increases productivity, reduces waste, and ensures that the pieces being cut are the proper size.

The following are types of carpenters:

Residential carpenters typically specialize in new-home, townhome, and condominium building and remodeling. As part of a single job, they might build and set forms for footings, walls and slabs, and frame and finish exterior walls, roofs, and decks. They frame interior walls, build stairs, and install drywall, crown molding, doors, and kitchen cabinets. Highly-skilled carpenters may also tile floors and lay wood floors and carpet. Fully-trained construction carpenters are easily able to switch from new-home building to remodeling.

Commercial carpenters typically remodel and help build commercial office buildings, hospitals, hotels, schools, and shopping malls. Some specialize in working with light gauge and load-bearing steel framing for interior partitions, exterior framing, and curtain wall construction. Others specialize in working with concrete forming systems and finishing interior and exterior walls, partitions, and ceilings. Highly skilled carpenters can usually do many of the same tasks as residential carpenters.

Industrial carpenters typically work in civil and industrial settings where they put up scaffolding and build and set forms for pouring concrete. Some industrial carpenters build tunnel bracing or partitions in underground passageways and mines to control the circulation of air to worksites. Others build concrete forms for tunnels, bridges, dams, power plants, or sewer construction projects.