Harbor Canvas & Design

Carpenters construct and repair building frameworks and structures--such as stairways, doorframes, partitions, and rafters--made from wood and other materials. They also may install kitchen cabinets, siding, and drywall.

Carpenters typically do the following:

• Follow blueprints and building plans to meet the needs of clients
• Install structures and fixtures, such as windows and molding
• Measure, cut, or shape wood, plastic, fiberglass, drywall, and other materials
• Construct building frameworks, including wall studs, floor joists, and doorframes
• Help put up, level, and install building framework with the aid of large pulleys and cranes
• Inspect and replace damaged framework or other structures and fixtures
• Instruct and direct laborers and other construction trade helpers

Carpenters are one of the most versatile construction occupations, with workers usually doing a variety of tasks. For example, some carpenters insulate office buildings; others install drywall or kitchen cabinets in homes. Those who help construct large buildings or bridges often make the wooden concrete forms for cement footings or pillars. Some carpenters build braces and scaffolding for buildings.

Carpenters use many different hand and power tools to cut and shape wood, plastic, fiberglass, or drywall. They commonly use handtools, including squares, levels, and chisels, as well as many power tools, such as sanders, circular saws, and nail guns. Carpenters put materials together with nails, screws, staples, and adhesives, and do a final check of their work to ensure accuracy. They use a tape measure on every project because proper measuring increases productivity, reduces waste, and ensures that the pieces being cut are the proper size.

The following are types of carpenters:

Residential carpenters typically specialize in new-home, townhome, and condominium building and remodeling. As part of a single job, they might build and set forms for footings, walls and slabs, and frame and finish exterior walls, roofs, and decks. They frame interior walls, build stairs, and install drywall, crown molding, doors, and kitchen cabinets. Highly-skilled carpenters may also tile floors and lay wood floors and carpet. Fully-trained construction carpenters are easily able to switch from new-home building to remodeling.

Commercial carpenters typically remodel and help build commercial office buildings, hospitals, hotels, schools, and shopping malls. Some specialize in working with light gauge and load-bearing steel framing for interior partitions, exterior framing, and curtain wall construction. Others specialize in working with concrete forming systems and finishing interior and exterior walls, partitions, and ceilings. Highly skilled carpenters can usually do many of the same tasks as residential carpenters.

Industrial carpenters typically work in civil and industrial settings where they put up scaffolding and build and set forms for pouring concrete. Some industrial carpenters build tunnel bracing or partitions in underground passageways and mines to control the circulation of air to worksites. Others build concrete forms for tunnels, bridges, dams, power plants, or sewer construction projects.

Metal and plastic machine workers set up and operate machines that cut, shape, and form metal and plastic materials or pieces.

Metal and plastic machine workers typically do the following:

• Set up machines and monitor them for unusual sound or vibration
• Lift material onto machines, manually or with a hoist
• Operate metal or plastic molding, casting, or coremaking machines
• Adjust the machines' speed and other settings
• Adjust cutting machine settings to account for irregularities
• Stop machines and remove finished products
• Test and measure finished products
• Remove and replace dull cutting tools
• Document production numbers in a computer database

Consumer products are made with many metal and plastic parts. These parts are produced by machines that are operated by metal and plastic machine workers. In general, these workers are separated into two groups: those who set up machines for operation and those who operate machines during production.

Although many workers both set up and operate the machines, some specialize in one of the following job types:

Machine setters, or setup workers, prepare the machines before production, perform test runs, and, if necessary, adjust and make minor repairs to the machinery before and during operation.

If, for example, the cutting tool inside a machine becomes dull after extended use, it is common for a setter to remove the tool, use a grinder or file to sharpen it, and place it back into the machine.

New tools are produced by tool and die makers. For more information, see the profile on machinists and tool and die makers.

After installing the tools into a machine, setup workers often produce the initial batch of goods, inspect the products, and turn the machine over to an operator.

Machine operators and tenders monitor the machinery during operation.

After a setter prepares a machine for production, an operator observes the machine and the products it produces. Operators may have to load the machine with materials for production or adjust the machine's speeds during production. They must periodically inspect the parts a machine produces. If they detect a minor problem, operators may fix it themselves. If the repair is more serious, they may have an industrial machinery mechanic fix it. For more information, see the profile on industrial machinery mechanics and maintenance workers. 

Setters, operators, and tenders usually are identified by the type of machine they work with. Job duties usually vary with the size of the manufacturer and the type of machine being operated. Although some workers specialize in one or two types of machinery, many are trained to set up or operate a variety of machines. Increasing automation allows machine setters to operate multiple machines at the same time.

In addition, newer production techniques, such as team-oriented “lean” manufacturing, require machine operators to rotate between different machines. Rotating assignments results in more varied work but also requires workers to have a wider range of skills.

The following are types of metal and plastic machine workers:

Computer-controlled machine tool operators, metal and plastic operate computer-controlled machines or robots to perform functions on metal or plastic workpieces.

Computer numerically controlled machine tool programmers, metal and plastic develop programs to control the machining or processing of metal or plastic parts by automatic machine tools, equipment, or systems.                                               

Extruding and drawing machine setters, operators, and tenders, metal and plastic set up or operate machines to extrude (pull out) or draw thermoplastic or metal materials into tubes, rods, hoses, wire, bars, or structural shapes. 

Forging machine setters, operators, and tenders, metal and plastic set up or operate machines that taper, shape, or form metal or plastic parts.

Rolling machine setters, operators, and tenders, metal and plastic set up or operate machines to roll steel or plastic or to flatten, temper, or reduce the thickness of material.

Cutting, punching, and press machine setters, operators, and tenders, metal and plastic set up or operate machines to saw, cut, shear, notch, bend, or straighten metal or plastic material.

Drilling and boring machine tool setters, operators, and tenders, metal and plastic set up or operate drilling machines to drill, bore, mill, or countersink metal or plastic workpieces.

Grinding, lapping, polishing, and buffing machine tool setters, operators, and tenders, metal and plastic set up or operate grinding and related tools that remove excess material from surfaces, sharpen edges or corners, or buff or polish metal or plastic workpieces.

Lathe and turning machine tool setters, operators, and tenders, metal and plastic set up or operate lathe and turning machines to turn, bore, thread, form, or face metal or plastic materials, such as wire or rod.

Milling and planing machine setters, operators, and tenders, metal and plastic set up or operate milling or planing machines to shape, groove, or profile metal or plastic workpieces.

Metal-refining furnace operators and tenders operate or tend furnaces, such as gas, oil, coal, electric-arc or electric induction, open-hearth or oxygen furnaces to melt and refine metal before casting or to produce specified types of steel.

Pourers and casters, metal operate hand-controlled mechanisms to pour and regulate the flow of molten metal into molds to produce castings or ingots.

Model makers, metal and plastic set up and operate machines, such as milling and engraving machines and jig borers, to make working models of metal or plastic objects.

Patternmakers, metal and plastic lay out, machine, fit, and assemble castings and parts to metal or plastic foundry patterns, coreboxes, or match plates.

Foundry mold and coremakers make or form wax or sand cores or molds used in the production of metal castings in foundries.

Molding, coremaking, and casting machine setters, operators, and tenders, metal and plastic set up or operate metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.

Multiple machine tool setters, operators, and tenders, metal and plastic set up or operate more than one type of cutting or forming machine tool or robot.

Welding, soldering, and brazing machine setters, operators, and tenders (including workers who operate laser cutters or laser-beam machines) set up or operate welding, soldering, or brazing machines or robots that weld, braze, solder, or heat treat metal products, components, or assemblies.

Heat treating equipment setters, operators, and tenders, metal and plastic set up or operate heating equipment, such as heat treating furnaces, flame-hardening machines, induction machines, soaking pits, or vacuum equipment, to temper, harden, anneal, or heat treat metal or plastic objects.

Plating and coating machine setters, operators, and tenders, metal and plastic set up or operate plating or coating machines to coat metal or plastic products with zinc, copper, nickel, or some other metal to protect or decorate surfaces (includes electrolytic processes).

Drywall and ceiling tile installers hang wallboards to walls and ceilings inside buildings. Tapers prepare the wallboards for painting, using tape and other materials. Many workers do both installing and taping.

Drywall installers typically do the following:

• Review design plans to minimize the number of cuts and waste of wallboard
• Measure the location of electrical outlets, plumbing, windows, and vents
• Cut drywall to the right size, using utility knives and power saws
• Fasten drywall panels to interior wall studs, using nails or screws
• Trim and smooth rough edges so boards join evenly

Ceiling tile installers typically do the following:

• Measure according to blueprints or drawings
• Nail or screw supports
• Put tiles or sheets of shock-absorbing materials on ceilings  
• Keep the tile in place with cement adhesive, nails, or screws

Tapers typically do the following:

• Prepare wall surface (wallboard) by patching nail holes
• Apply tape and use sealing compound to cover joints between wallboards
• Apply additional coats of sealing compound to create an even surface
• Sand all joints and holes to a smooth, seamless finish

Installers are also called framers or hangers. Tapers are also called finishers. Ceiling tile installers are sometimes called acoustical carpenters because they work with tiles that block sound.

Once wallboards are hung, workers use increasingly wider trowels to spread multiple coats of spackle over cracks, indentations, and any remaining imperfections. Some workers may use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

To work on ceilings, drywall and ceiling tile installers and tapers may use mechanical lifts or stand on stilts, ladders, or scaffolds.

Construction laborers and helpers do many basic tasks that require physical labor on construction sites.

Construction laborers and helpers typically do the following:

• Clean and prepare construction sites by removing debris and possible hazards
• Load or unload building materials to be used in construction
• Build or take apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
• Dig trenches, backfill holes, or compact earth to prepare for construction
• Operate or tend equipment and machines used in construction, such as concrete mixers
• Help other craftworkers with their duties
• Follow construction plans and instructions from the people they are working for

Construction laborers and helpers work on almost all construction sites, doing a wide range of tasks from the very easy to the extremely difficult and hazardous. Although many of the tasks they do require some training and experience, most jobs usually require little skill and can be learned quickly. 

The following are occupational specialties:

Construction laborers do a variety of construction-related activities during all phases of construction. Although most laborers are generalists--such as those who install barricades, cones, and markers to control traffic patterns--many others specialize. For example, those who operate the machines and equipment that lay concrete or asphalt on roads are more likely to specialize in those areas.

Most construction laborers work in the following areas:

• Building homes and businesses
• Tearing down buildings
• Removing hazardous materials
• Building highways and roads
• Digging tunnels and mine shafts

Construction laborers use a variety of tools and equipment. Some tools are simple, such as brooms and shovels; other equipment is more sophisticated, such as pavement breakers, jackhammers, earth tampers, and surveying equipment.

With special training, laborers may help transport and use explosives or run hydraulic boring machines to dig out tunnels. They may learn to use laser beam equipment to place pipes and use computers to control robotic pipe cutters. They may become certified to remove asbestos, lead, or chemicals.

Helpers assist construction craftworkers, such as electricians and carpenters, with a variety of basic tasks. They may carry tools and materials or help set up equipment. For example, many helpers work with cement masons to move and set forms. Many other helpers assist with taking apart equipment, cleaning up sites, and disposing of waste, as well as helping with any other needs of craftworkers.

Many construction trades have helpers who assist craftworkers. The following are examples of trades that have associated helpers:

• Brickmasons, blockmasons, stonemasons, and tile and marble setters
• Carpenters
• Electricians
• Painters, paperhangers, plasterers, and stucco masons
• Pipelayers, plumbers, pipefitters, and steamfitters
• Roofers

Workers in water transportation occupations operate and maintain ships that take cargo and people over water. These ships travel to and from foreign ports across the ocean, to domestic ports along the coasts, across the Great Lakes, and along the country's many inland waterways.

Water transportation workers typically do the following:

• Operate and maintain private ships
• Follow their ship's strict chain of command
• Ensure the safety of all people and cargo on board

These workers, sometimes called merchant mariners, work on a variety of ships.

Some operate large deep-sea container ships to transport manufactured goods around the world.

Others work on bulk carriers that move heavy commodities, such as coal or steel across the oceans and over the Great Lakes.

Still others work on both large and small tankers that carry oil and other liquid products around the country and the world. Others work on supply ships that transport equipment and supplies to offshore oil and gas platforms.

Workers on tugboats help barges and other boats maneuver in small harbors and at sea.

Salvage vessels that offer emergency services also employ merchant mariners.

Cruise ships employ a large number of water transportation workers, and some merchant mariners work on ferries to transport passengers along shorter distances.

A typical deep sea merchant ship, large coastal ship, or Great Lakes merchant ship employs a captain and chief engineer, along with three mates, three assistant engineers, and a number of sailors and marine oilers. Smaller vessels that operate in harbors or rivers may have a smaller crew, with a captain, sometimes a mate, and one to a few sailors.

Also, there are other workers on ships, such as cooks, electricians, and mechanics, who do not need a merchant marine license. For more information, see the profiles on cooks, electricians, and general maintenance and repair workers.

The following are some types of water transportation occupations:

Captains, sometimes called masters, have overall command of a ship. They have the final responsibility for the safety of the crew, cargo, and passengers. Captains typically do the following:

• Supervise the work of other officers and the crew
• Ensure that proper safety procedures are followed
• Assess their crew's abilities and determine if more workers are needed
• Prepare a maintenance and repair budget
• Oversee the loading and unloading of cargo or passengers
• Keep logs and other records that track the ship's movements and activities
• Interact with passengers on cruise ships

Mates, or deck officers, direct the operation of a ship while the captain is off duty. Large ships have three officers, called first, second, and third mates. The first mate has the highest authority and takes command of the ship if the captain is incapacitated. Usually, the first mate is in charge of the cargo and/or passengers, the second mate is in charge of navigation, and the third mate is in charge of safety. On smaller vessels, there may be only one mate. Deck officers typically do the following:

• Alternate watches with the captain and other officers
• Supervise and coordinate the activities of the deck crew
• Directly oversee docking the ship
• Monitor the ship's position, using charts and other navigational aides
• Determine the speed and direction of the vessel
• Inspect the cargo hold during loading, to ensure that the cargo is stowed according to specifications
• Make announcements to passengers, when needed

Pilots guide ships in harbors, on rivers, and on other confined waterways. They work in places where a high degree of familiarity with local tides, currents, and hazards is needed. Many pilots are independent contractors and go aboard a ship to guide it through a particular waterway. Some, called harbor pilots, work for ports and help many ships coming into the harbor during the day.

Sailors, or deckhands, operate and maintain the vessel and deck equipment. They make up the deck crew and keep all parts of a ship, other than areas related to the engine and motor, in good working order. New deckhands are called ordinary seamen and do the least-complicated tasks. Experienced deckhands are called able seamen and usually make up most of a crew. Some large ships have a boatswain, who is the chief of the deck crew. Sailors typically do the following:

• Stand watch, looking for other vessels or obstructions in their ship's path, as well as looking for navigational aids, such as buoys and lighthouses
• Steer the ship and measure water depth in shallow water
• Do routine maintenance, such as painting the deck and chipping away rust
• Keep the inside of the ship clean
• Handle lines when docking or departing
• Tie barges together when they are being towed
• Load and unload cargo
• Help passengers, when needed

Ship engineers operate and maintain a vessel's propulsion system. This includes the engine, boilers, generators, pumps and other machinery. Large vessels usually carry a chief engineer, who has command of the engine room and its crew, and a first, second, and third assistant engineer. The engineer's alternate oversees the engine and related machinery. Engineers typically do the following:

• Maintain the electrical, refrigeration, and ventilation systems of a ship
• Start the engine and regulate the vessel's speed, based on the captain's orders
• Record information in an engineering log
• Keep an inventory of mechanical parts and supplies
• Do routine maintenance checks throughout the day
• Calculate refueling requirements

Marine oilers work in the engine room, helping the engineers keep the propulsion system in working order. They are the engine room equivalent of sailors. New oilers are usually called wipers or pumpmen on vessels handling liquid cargo. With experience, an oiler can become a Qualified Member of the Engine Department (QMED). Marine oilers typically do the following:

• Lubricate gears, shafts, bearings, and other parts of the engine or motor
• Read pressure and temperature gauges and record data
• Help engineers with repairs to machinery
• Connect hoses, operate pumps, and clean tanks

Motorboat operators run small, motor-driven boats that carry six or fewer passengers. They work for a variety of services, such as fishing charters, tours, and harbor patrols.