JLC Enterprises

(480) 967-9183

CLICK HERE TO CLAIM THIS LISTING
Addresses Found 1230 N Hobson St Ste 108, Gilbert, AZ 85233 1230 N Hobson St, Gilbert, AZ 85233
Territories Found Maricopa, AZ
Matching Phone Xcel Xteriors Inc

Sheet Metal Workers

Sheet metal workers fabricate or install products that are made from thin metal sheets, such as ducts used for heating and air-conditioning.

Sheet metal workers typically do the following:

  • Select types of sheet metal or nonmetallic material
  • Measure and mark dimensions and reference lines on metal sheets
  • Drill holes in metal, for screws, bolts, and rivets
  • Install metal sheets with supportive frameworks
  • Fabricate or alter parts at construction sites
  • Maneuver large parts to be installed, and anchor the parts
  • Fasten seams or joints by welding, bolting, riveting, or soldering

Sheet metal workers make, install, and maintain thin sheet metal products. Although sheet metal is used to make many products, such as rain gutters, outdoor signs, and siding, it is most commonly used to make ducts for heating and air-conditioning.

Sheet metal workers study plans and specifications to determine the kind and quantity of materials they will need. Using computer-controlled saws, lasers, shears, and presses, they measure, cut, bend, and fasten pieces of sheet metal.

In shops without computerized equipment, sheet metal workers make the required calculations and use tapes and rulers to lay out the work. Then, they cut or stamp the parts with machine tools.

In manufacturing plants, sheet metal workers program and operate computerized metalworking equipment. For example, they may make sheet metal parts for aircraft or industrial equipment. Sheet metal workers in those jobs may be responsible for programming the computer control systems of the equipment they operate.

Before assembling pieces, sheet metal workers check each part for accuracy. If necessary, they use hand, rotary, or squaring shears and hacksaws to finish pieces.

After inspecting the metal pieces, workers fasten seams and joints with welds, bolts, rivets, solder, or other connecting devices. Then they take the parts constructed in the shop and assemble the pieces further as they install them.

Most fabrication work is done in shops with some final assembly done on the job. Some jobs are done completely at the jobsite. When installing a metal roof, for example, sheet metal workers usually measure and cut the roofing panels onsite.

In addition to installing sheet metal, some workers install fiberglass and plastic board. 

In some shops and factories, sheet metal workers care for and maintain the equipment they use. 

Sheet metal workers do both construction-related work and the mass production of sheet metal products in manufacturing. Sheet metal workers are often separated into four specialties: fabrication, installation, maintenance, and testing and balancing. The following describes these types of sheet metal workers:

Fabrication sheet metal workers, sometimes called precision sheet metal workers, make ducts, gutters, and other metal products. Most work in shops and factories, operating tools and equipment. Although some of the fabrication techniques used in large-scale manufacturing are similar to those used in smaller shops, the work may be highly automated and repetitive. Many fabrication shops have automated machinery, and workers use computer-aided drafting (CAD) and building information modeling (BIM) systems to make products.

Installation sheet metal workers install heating, ventilation, and air-conditioning (HVAC) ducts. They also install other sheet metal products, such as metal roofs, siding, or gutters. They work on new construction and on renovation projects. 

Maintenance sheet metal workers repair and clean ventilation systems so the systems use less energy. Workers remove dust and moisture and fix leaks or breaks in the sheet metal that makes up the ductwork.

Testing and balancing sheet metal specialists ensure that HVAC systems heat and cool rooms properly. They ensure that hot and cold air is transferred through sheet metal ducts efficiently. For more information on workers who install or repair HVAC systems, see the profile on heating, air conditioning, and refrigeration mechanics and installers.


Drywall and Ceiling Tile Installers, and Tapers

Drywall and ceiling tile installers hang wallboards to walls and ceilings inside buildings. Tapers prepare the wallboards for painting, using tape and other materials. Many workers do both installing and taping.

Drywall installers typically do the following:

  • Review design plans to minimize the number of cuts and waste of wallboard
  • Measure the location of electrical outlets, plumbing, windows, and vents
  • Cut drywall to the right size, using utility knives and power saws
  • Fasten drywall panels to interior wall studs, using nails or screws
  • Trim and smooth rough edges so boards join evenly

Ceiling tile installers typically do the following:

  • Measure according to blueprints or drawings
  • Nail or screw supports
  • Put tiles or sheets of shock-absorbing materials on ceilings  
  • Keep the tile in place with cement adhesive, nails, or screws

Tapers typically do the following:

  • Prepare wall surface (wallboard) by patching nail holes
  • Apply tape and use sealing compound to cover joints between wallboards
  • Apply additional coats of sealing compound to create an even surface
  • Sand all joints and holes to a smooth, seamless finish

Installers are also called framers or hangers. Tapers are also called finishers. Ceiling tile installers are sometimes called acoustical carpenters because they work with tiles that block sound.

Once wallboards are hung, workers use increasingly wider trowels to spread multiple coats of spackle over cracks, indentations, and any remaining imperfections. Some workers may use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

To work on ceilings, drywall and ceiling tile installers and tapers may use mechanical lifts or stand on stilts, ladders, or scaffolds.


Construction Managers

Construction managers plan, coordinate, budget, and supervise construction projects from early development to completion.

Construction managers typically do the following:

  • Prepare and negotiate cost estimates, budgets, and work timetables
  • Select appropriate construction methods and strategies
  • Interpret and explain contracts and technical information to workers and other professionals
  • Report on work progress and budget matters to clients
  • Collaborate with architects, engineers, and other construction and building specialists
  • Instruct and supervise construction personnel and activities onsite
  • Respond to work delays and other problems and emergencies
  • Select, hire, and instruct laborers and subcontractors  
  • Comply with legal requirements, building and safety codes, and other regulations

Construction managers, often called general contractors or project managers, coordinate and supervise a wide variety of projects, including the building of all types of residential, commercial, and industrial structures, roads, bridges, powerplants, schools, and hospitals. They oversee specialized contractors and other personnel. Construction managers schedule and coordinate all design and construction processes to ensure a productive and safe work environment. They also make sure jobs are completed on time and on budget with the right amount of tools, equipment, and materials. Many managers also are responsible for obtaining necessary permits and licenses. They are often responsible for multiple projects at a time.

Construction managers work closely with other building specialists, such as architects, engineers, and a variety of trade workers, such as stonemasons, electricians, and carpenters. Projects may require specialists in everything from structural metalworking and painting, to landscaping, building roads, installing carpets, and excavating sites. Depending on the project, construction managers also may interact with lawyers and local government officials. For example, when working on city-owned property or municipal buildings, managers sometimes confer with city council members to ensure that all regulations are met.

For projects too large to be managed by one person, such as office buildings and industrial complexes, a construction manager would only be in charge of one part of the project. Each construction manager would oversee a specific construction phase and choose subcontractors to complete it. Construction managers may need to collaborate and coordinate with other construction managers who are responsible for different aspects of the project.

To maximize efficiency and productivity, construction managers often use specialized cost-estimating and planning software to effectively budget the time and money required to complete specific projects. Many managers also use software to determine the best way to get materials to the building site. For more information, see the profile on cost estimators.


Carpenters

Carpenters construct and repair building frameworks and structures--such as stairways, doorframes, partitions, and rafters--made from wood and other materials. They also may install kitchen cabinets, siding, and drywall.

Carpenters typically do the following:

  • Follow blueprints and building plans to meet the needs of clients
  • Install structures and fixtures, such as windows and molding
  • Measure, cut, or shape wood, plastic, fiberglass, drywall, and other materials
  • Construct building frameworks, including wall studs, floor joists, and doorframes
  • Help put up, level, and install building framework with the aid of large pulleys and cranes
  • Inspect and replace damaged framework or other structures and fixtures
  • Instruct and direct laborers and other construction trade helpers

Carpenters are one of the most versatile construction occupations, with workers usually doing a variety of tasks. For example, some carpenters insulate office buildings; others install drywall or kitchen cabinets in homes. Those who help construct large buildings or bridges often make the wooden concrete forms for cement footings or pillars. Some carpenters build braces and scaffolding for buildings.

Carpenters use many different hand and power tools to cut and shape wood, plastic, fiberglass, or drywall. They commonly use handtools, including squares, levels, and chisels, as well as many power tools, such as sanders, circular saws, and nail guns. Carpenters put materials together with nails, screws, staples, and adhesives, and do a final check of their work to ensure accuracy. They use a tape measure on every project because proper measuring increases productivity, reduces waste, and ensures that the pieces being cut are the proper size.

The following are types of carpenters:

Residential carpenters typically specialize in new-home, townhome, and condominium building and remodeling. As part of a single job, they might build and set forms for footings, walls and slabs, and frame and finish exterior walls, roofs, and decks. They frame interior walls, build stairs, and install drywall, crown molding, doors, and kitchen cabinets. Highly-skilled carpenters may also tile floors and lay wood floors and carpet. Fully-trained construction carpenters are easily able to switch from new-home building to remodeling.

Commercial carpenters typically remodel and help build commercial office buildings, hospitals, hotels, schools, and shopping malls. Some specialize in working with light gauge and load-bearing steel framing for interior partitions, exterior framing, and curtain wall construction. Others specialize in working with concrete forming systems and finishing interior and exterior walls, partitions, and ceilings. Highly skilled carpenters can usually do many of the same tasks as residential carpenters.

Industrial carpenters typically work in civil and industrial settings where they put up scaffolding and build and set forms for pouring concrete. Some industrial carpenters build tunnel bracing or partitions in underground passageways and mines to control the circulation of air to worksites. Others build concrete forms for tunnels, bridges, dams, power plants, or sewer construction projects.


Architects

Architects plan and design buildings and other structures.

Architects typically do the following:

  • Seek new work by marketing and giving presentations
  • Consult with clients to determine requirements for structures
  • Estimate materials, equipment, costs, and construction time
  • Prepare, design, and structure specifications
  • Direct workers who prepare drawings and documents
  • Prepare scaled drawings of the project
  • Prepare contract documents for building contractors
  • Manage construction contracts
  • Visit worksites to ensure that construction adheres to architectural plans

People need places to live, work, play, learn, worship, meet, govern, shop, and eat. Architects are responsible for designing these places, whether they are private or public; indoors or outdoors; or rooms, buildings, or complexes.

Architects discuss with clients the objectives, requirements, and budget of a project. In some cases, architects provide various predesign services, such as feasibility and environmental impact studies, site selection, cost analyses and land-use studies, and design requirements. For example, architects may determine a building's space requirements by researching its number and types of potential users.

After discussing and agreeing on the initial proposal, architects develop final construction plans that show the building's appearance and details for its construction. Accompanying these plans are drawings of the structural system; air-conditioning, heating, and ventilating systems; electrical systems; communications systems; plumbing; and, possibly, site and landscape plans.

In developing designs, architects must follow building codes, zoning laws, fire regulations, and other ordinances, such as those requiring easy access by people who are disabled.

Computer-aided design and drafting (CADD) and building information modeling (BIM) technology have replaced traditional drafting paper and pencil as the most common methods for creating designs and construction drawings.

Architects also may help clients get construction bids, select contractors, and negotiate construction contracts.

As construction proceeds, architects may visit building sites to ensure that contractors follow the design, keep to the schedule, use the specified materials, and meet work-quality standards. The job is not complete until all construction is finished, required tests are conducted, and construction costs are paid.

Architects often work with workers in related professions. For more information on these occupations, see the profiles on civil engineers, urban and regional planners, interior designers, and landscape architects.


Hancock Claims ConsultantsNationwide Overspray